The m1132 mfp printer is installed. How to download and install the driver for the LaserJet M1132 MFP on Windows? detailed instructions

The driver for the HP LaserJet Pro M1132 MFP is software that will enable the multifunctional device to work correctly and interact with the operating system. Also allows you to configure print and scan settings.

To install the driver, run the executable file and follow the instructions (which are in the form of animations). In particular, pay attention to preparing the MFP for operation (removing protective films, fasteners, gaskets, etc. - if the device is new) and connecting to a PC. Next, select the device model (the installer is universal - also supports installing drivers for the M1212 - M1219 series) and follow the instructions again.

As with other MFPs, the driver for the HP LaserJet Pro M1132 MFP allows you to change print and copy settings. For example, you can choose the paper size and type, add watermarks and other effects, change the orientation, select scan quality, and more.

You can remove the driver through the “Control Panel” in the “Uninstall Programs” menu.

Features of the program

You can download the HP LaserJet Pro M1132 MFP driver absolutely free.

Need a device for printing, scanning, and copying, then HP LaserJet Pro M1132 is an ideal device. This printer is very small and has a beautiful look. It will save you’re a lot of time and money too because it consumes very less power. HP LaserJet Pro M1132 printer is a multifunction printer with inbuilt energy star mode. With this mode, it works properly even in low power.

HP LaserJet Pro M1132 MFP driver Supported Windows Operating Systems

HP LaserJet Pro M1132 MFP driver Supported Mac Operating Systems

HP LaserJet Pro M1132 MFP driver supports a wide variety of windows operating system which includes Windows Vista, Windows 7, Windows 8, and Windows 10 with a 1GHz processor and 1 GB RAM. The other version is Windows XP with 233 MHz processor and 128 MB RAM. The supported versions of Macintosh are Mac OS X v10.4, 10.5, 10.6 with Intel Core Processor and 256 MB RAM. The minimum free disk requires for installation of the file is 2 GB, 128 MB, and 150 MB for Windows or Macintosh.

Its physical dimensions are 250x265x415 mm, and its weight is 7.0 kg. HP LaserJet Pro M1132 media capacity is 150 sheets in the input tray and 100 sheets in the output tray.

This device handles various media type which is envelopes, transparencies, and plain paper. The automatic document feeder capacity is up to 35 sheets. It runs on 365 watts of power with the input voltage of 220 to 240 and 50 Hz input frequency.

HP LaserJet Pro M1132 supports two-sided duplex copy function manually with 300 dots per inch (dpi) resolution. It also provides the 1200 pixels per inch (PPI) resolution for scanning. The multiple resolutions stand at 600 pixels per inch (PPI), 300 pixels per inch for graphics, and 150 pixels per inch for photos resolution. The speed of printing depends on paper size like for letter speed is 19 ppm and 18 ppm for A4 paper size.

Windows XP / Vista / 7 / 8 / 8.1 / 10

Bit options: x32/x64

Driver size: 10 MB (x32) and 11 MB (x64)

How to install driver on Windows 10

The HP LaserJet Pro M1132 multifunction device from a well-known American manufacturer is well suited not only for office space, but also for home use. After purchasing the equipment, first of all you will need to fully configure it in the operating system, which can be done using a special software utility. You can download and install the driver for this model using the links above.

After opening the newly downloaded file, the main window of the installation utility will appear in front of you, in which you need to select the USB installation method, as well as decide on the device being used. In our case, you should click on “HP LaserJet Pro M1130 Series”.

Then click “Start installation” and move on to the next step.

You are welcomed by an animated guide that will guide you through the entire installation process. In this window you can familiarize yourself with the basic recommendations for installing equipment in a ventilated area.

Here you will need to remove the orange ribbons from the printer and remove the plastic insulation.

We open the toner slot, in which we also remove the protective gasket, cartridge and shipping tapes. We follow the further guidance and move on.

Remove the next orange tape on one of the edges of the new cartridge. Gently rock the toner for the smoothest distribution of the internal powder.

We install the toner in the slot required for this and lock the lid.

We install a special paper container in the same way as shown on the slide.

Connect the printer using the supplied power cable. Let's move on to installing the software directly, following the additional recommendations on the display. To continue, click “Install software...”

Here you need to decide on the installation process method. We recommend choosing “Easy installation”, which will allow you to set up your equipment as quickly and safely as possible. Click “Next”.

In the new window, select the same item as shown in the screenshot below and click on the “Next” button.

On this page you will find a complete set of drivers for the HP LaserJet Pro M1132 All-In-One. The scan driver, print driver and copier driver are collected in one installation package. In addition, the package may contain additional convenient programs for working with MFPs.

The package is intended for all versions of the Windows operating system, so you don’t have to select files for a specific system. Download and run the installation file (its only drawback is that it is 212 MB in size). Next, follow the installation instructions, the installer is equipped with Russian language. During installation, you will need to connect the device to your computer and turn it on. Without a connection, the installation will not complete.

M1132 MFP drivers need to be updated periodically to ensure maximum device performance. Device manufacturers are constantly releasing new versions of drivers that fix errors and speed up the process of interaction between a computer and a printer or scanner. You can subscribe to updates on our website so you don't have to manually check for scanner driver and printer driver updates manually.

The HP LaserJet Pro M1132 is a device that allows you to print, scan, and copy documents. Its print output of 8,000 pages per month makes it suitable for small and medium-sized offices. Printer print speed: 18 ppm. Maximum paper size for all operations: A4. The scanner can format images with a color depth of 24 bits and a resolution of up to 19200x19200 dpi. Images can be saved or automatically sent by e-mail.

HP LaserJet Pro M1132 MFP Driver

HP LaserJet Pro M1132 MFP Driver is not a software upgrade. It is a full software solution for your printer. If a prior version software is currently installed, it must be uninstalled before installing this version. The full software solution provides print and scan functionality.

Drivers for / Treiber für / Drivers for / Ovladače pro / Sterowniki do HP LaserJet Pro M1132 Printer.

HP LaserJet Pro M1132 MFP Driver Release Details

Driver: HP LaserJet Full Feature Software and Driver
Version: 5.0
Filename: LJM1130_M1210_MFP_Full_Solution.exe
File size: 212.7 MB
Released: Jul 22, 2016
Supported OS: Windows 10 (64-bit), Windows 10 (32-bit), Windows 8.1 (32-bit), Windows 8.1 (64-bit), Windows 8 (32-bit), Windows 8 (64-bit), Windows 7 (32-bit), Windows 7 (64-bit), Windows Vista (32-bit), Windows Vista (64-bit), Windows XP (32-bit), Windows XP (64-bit)
HP LaserJet Pro M1132 MFP Driver Windows 10:

Diagnose HP Printer Problems

Diagnose HP Print and Scan problems with HP Print and Scan Doctor
HP Print and Scan Doctor is a free Windows Tool to assist you solve printing and scanning issues.

How to install HP LaserJet Pro M1132 MFP Driver?

1. Close all HP software/programs running on your machine.
2. Uninstall your current version of HP Print Driver for HP LaserJet Pro M1132 MFP Printer.
3. Click on the above download link and save the HP LaserJet Pro M1132 MFP Printer Driver file to your hard disk.
4. Double click on the downloaded file. This will extract all the HP LaserJet Pro M1132 MFP driver files into a directory on your hard drive.
5. Follow the on-screen instructions proved by HP to proceed installation.

HP LaserJet Pro M1132 MFP Printer

HP Laserjet Pro M1132 multifunction printer is a laser monochrome printer. If you print 250 to 2000 pages per month it’s for you.

The printer comes with standard 8 MB memory and it is maximum supported memory for this printer.

This is an energy star certified printer. It consumes 375 watts power in operational mode and 3.2 watts during stand by mode.