home-Laptop-Program for updating Samsung C3. Updating Android OS on a Samsung phone

Program for updating Samsung C3. Updating Android OS on a Samsung phone

Hello, today let me show you how to flash Samsung GT-I9300 Galaxy S3 standard firmware and rooted (or rooted?). Since the amount of information on this device is quite large, I decided that service codes, custom firmware and backup of this model I’ll tell you next time. Everyone already knows what kind of beast this is - there are a lot of reviews and reviews on the Internet.

Initially, the device was supplied with Android version 4.0.4 “Ice Cream Sandwich”, they still deliver them with this old software, but you can already update it to version 4.1.2 “Jelly Bean”, they also promise updates at the end of the year up to version 4.3 - we're still waiting. Initially, in the first versions, the device was wildly glitchy, froze, turned itself off, applications stopped working (processes were terminated urgently), lost the network and stupidly died - it turned off for no particular reason and would not turn on again - on servers they stupidly changed the boards under warranty (who was lucky) and They explained that this was a factory defect, but about a year later the situation leveled out and there were fewer such jambs, which Samsung engineers could correct.

Most main drawback Today this device has - this is its fragility - if you pressed or pinched it a little and God forbid you dropped it - a crack in the sensor is guaranteed, and this is a replacement display module entirely (up to 8,000 thousand rubles for repairs in some sharashkas). So be careful. And let's get started with the firmware.

ATTENTION!!! Before you start updating software, rooting, resetting settings and other manipulations with your own or, God forbid, someone else’s device HIGHLY RECOMMEND read this one. In short, you have been warned and don’t say later that this is the first time you’ve heard this.

Samsung GT-I9300 Galaxy S3 - software update and ROOT rights.

Before we start flashing the firmware, let's first prepare everything we need:

  • Let's fully charge the battery;
  • MicroUSB Any cable will do, but it’s better to take one from the kit;
  • Firmware, latest version - I9300XXUGOE1 ;
  • Flasher program - Odin3 v3.04 ;
  • Drivers - install kies (when updating the software, do not run this application, or better yet, go to the task manager and kill all processes called kies). But it’s better to install the drivers there and post about how to install them correctly;
  • A medium-configuration personal computer or laptop with the WIN7 SP1 operating system should be enough;
  • CF-Auto-Root-m0-m0xx-gti9300.tar - firmware file for rooting.

First do backup copy all data or use the KIES program to save all necessary files on computer. Soon there will be an article on how to backup the firmware - I’m already writing it. You can download all files at the end of the article.

Samsung GT-I9300 Galaxy S3- factory firmware.

Step 1:If you have not yet charged the battery, then it’s time to do it, insert the battery into the phone and enter the device into DOWNLOADING mode - to do this, first press and hold HOME button(central), then the volume down key and then the power button.

Step 2:Information will appear warning us about possible problems with the phone when using modified firmware. And it offers to either continue or restart the smartphone. Continue pressing the volume up key. A green android robot should appear. We are on the right track.

Step 3:Download the archive with the firmware and flash driver and launch the application Odin3_v3.04.exe.

Step 4:The main window of the flashing program appeared in front of us Odin3 v3.04.

Step 5:And so, the smartphone is entered into download mode, the battery is charged, important information saved, drivers installed (do not forget to “kill” all Kies processes if you installed it). We connect the cable to the phone - the com port should be detected and a line with the word Added will appear - this is a good sign, it means that the device has been detected by the PC.

Step 6:Now it’s time to configure ONE - selecting firmware files:

PIT -mx.pit

Bootloader - BOOTLOADER

PDA - CODE _I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5

PHONE - MODEM _I9300XXEMG4_REV02_REV04_CL1360150.tar.md5

C.S.C. - C.S.C. _OXE_I9300OXEEMH1_CL1359224_REV00_user_low_ship.tar.md5

BE CAREFUL - CHECK SEVERAL TIMES!!!

If everything is fine, press the START button.

Step 8:"PASS"- in about five minutes the device will be flashed. All, Samsung GT-I9300 Galaxy S3 ready to use. You latest version firmware.

Step 9:Reboot and check the software version by typing the following code on your phone keypad *#1234# .

Obtaining ROOT rights.

If you still decide to root your Samsung GT-I9300 Galaxy S3, it means you are aware of what you are doing and take full responsibility upon yourself. And so let's get started:

Step 1:Download CF-Auto-Root-m0-m0xx-gti9300.tar - This is a rootkit, so you will need to disable your ANTI-VIRUS, unzip this archive. Final file must have extension .tar or .tar.md5.

Step 2:We switch the device to DOWNLOADING mode - see the instructions above.

Step 3:Let's launch application Odin3 v3.04.exe.

Step 4:Select the rootkit file and put it in the field PDA. If you have version androida 4.1.x, then be sure to uncheck Auto-reboot.

Step 5:We connect the phone with a cable to the computer and press the Start button. In a minute, the device will flash, and since we unchecked Auto-reboot- turn off the device manually and enter it into recovery mode by holding the volume up button in turn, then the HOME button and the power button. Root rights are automatically installed.

Share:

Install optional products - DriverDoc (Solvusoft) | | | |


This page contains information about installing the latest driver downloads Samsung Galaxy S3 using Samsung Driver Update Tool.

Samsung Galaxy S3 drivers are small programs that enable your hardware Mobile phone interact with software operating system. Constant software updates Samsung software Galaxy S3 prevents crashes and maximizes hardware and system performance. Using outdated or damaged Samsung drivers Galaxy S3 may cause system errors, failures and failure of equipment or computer. Moreover, installing the wrong Samsung drivers can make these problems worse.

Advice: if you don't know how to update drivers Samsung devices manually, we recommend downloading the Samsung Galaxy S3 Driver Utility. This tool will automatically download and update the correct versions of Samsung Galaxy S3 drivers, preventing you from installing the wrong Galaxy S3 drivers.


About the author: Jay Geater is President and general director Solvusoft Corporation is a global software company focused on innovative service programs. He has a lifelong passion for computers and loves everything related to computers, software and new technology.

As you know, Samsung is no longer releasing an OTA update for the Galaxy S3 Mini. So the phone is stuck on KitKat OS, unless of course you want to keep it
How to update Galaxy S3 Mini from Android 5.0 Lollipop.
As you know, Samsung is no longer releasing an OTA update for the Galaxy S3 Mini. Thus, the phone is stuck on KitKat OS, unless of course you want to keep the devices official. But, if you're willing to lift up a little operating version, then we recommend you check the recommendation below. In this tutorial, we will show you how to easily and safely update your Samsung Galaxy S3 Mini to Android 5.0 Lollipop OS using new firmware Rom.
This ROM is built from pure AOSP Android 5.0 Lollipop OS, as the goal is to bring the default and latest version Android firmware for Galaxy S3 Mini. The drive has therefore been customized and optimized to fit with your SGS3 Mini. So, if you want to check it yourself, then don't hesitate to check all the lines from below as you will find all the parts required for the flashing process there.
Firstly, you should know that this custom version of Android 5.0 L OS runs smoothly on Samsung Galaxy S3 Mini. According to users who have already installed AOSP ROM, there are no errors or other problems associated with the software. Of course, since we're talking about custom drives, you might find some unusual things, but don't expect to have major bugs or annoying problems and can set it up for daily use.
After flashing the firmware, you will be able to get the latest Lolipop features and applications. In addition, using this disk, you can improve your Galaxy S3 Mini device.


In a few words, you can improve battery life, typing higher speed, change Samsung UI default, update quick view web pages and updating other features.
I would also like to note that once you receive this firmware, your phone is no longer under warranty. In case something happens by phone, you will take it service center company, you will have to pay. But the guarantee can also be returned by using the official firmware.
I would also like to note that this disk is not an official release from Samsung or Google, only a custom disk that was created on the latest AOSP release. So do not bundle this firmware with the aforementioned company.
Before installing, your phone must have Root rights and latest version recovery ( TWRP Recovery). I also remind you, never forget to make a Nandroid backup of the disk you are sitting at the moment, this means that if new disk If you don't like it, you can easily return your old drive. How? Read below.
Read and understand the entire manual before actually following the instructions.
Warning: Use these instructions at your own risk. We will not be responsible for anything that happens to you or your device as a result of using the information in this guide.
This tutorial is for Galaxy S3 Mini only. Please do not try to install on any other device.


Make sure that the drivers for your device are installed on your computer. You need to enable USB debugging mode which is disabled by default. Your smartphone should have 70-80% charge. Never skip Nandroid backup as it is very useful, if this firmware does not work as you want, then you can easily get your drive back to the previous one. This tutorial will destroy all data.


Proceed at your own risk. Samsung Kies will not detect your phone after installing this ROM because it is a custom firmware. Make sure you have backed up all the data on your phone before proceeding. How to do backup read here. Another way: here.
New stable CM12.1 release (20160210) is available for S3 Mini, go here.
The developers recommend installing the firmware via TWRP Recovery, and we will do so.
> Install the firmware via TWRP Recovery:


1. First, download both files from the link above to your computer.
2. Connect your device to your computer and copy both files to the root directory on the device(not any folder).
3. Unplug your phone and turn it off. And make sure you wait 5-6 seconds to complete the power off completely.
4. Now you will boot your phone into recovery mode (TWRP Recovery) by pressing and holding the Volume Up, Home and Power buttons.
5. Perform a nandroid backup existing disk using the archiving program located in the twrp recovery main menu.
6. Select: Backup ››, - set file name and confirm the process.
8. Select: Wipe "Advanced Wipe" - and from below select: Swipe to wipe.
9. Select: Install ›› cm12.0_golden.nova.20150308.zip ››, - confirm the process.
10.


Select: Install ›› gapps-lp-20150314.zip ››, - confirm the process.
You should now be running Android 5.0.2 Lollipop on your Galaxy S3 Mini. Enjoy!
Returning to the previous ROM: To return to the previous ROM, boot into recovery, select Backup and Restore and restore your previous ROM by selecting it from the list.


How to update galaxy s3 mini from android 5.0 lollipop

Samsung has officially stopped upgrading the international variant, meaning you can't get the official Android update KitKat. Naturally, when such a thing happens, online communities pick up the slack. And this is very good news, because Samsung, despite a lot of complaints and online petitions, does not seem to want to upgrade its Galaxy S3 to KitKat (even though everyone knows that you can; Android 4.4.4 is designed to run on a 1GHz processor and 512 MB RAM).

ParanoidAndroid is a ROM created by a dedicated team of developers, and the latest (final) version has just arrived internationally. Galaxy models S3, that is, the model designated I9300. Of course, being a custom ROM, the process of installing it on your phone requires you to have root access, which could potentially brick the phone if it goes wrong and void the warranty too.

Still unsure? Here is an excerpt from Android View about the ROM review: “PA3+ is an AOSP based ROM and what I love most is its beauty, especially the hybrid flexibility. ROM performance is fast and responsive, but one thing that still worries me is battery life. Don't expect very decent battery performance from it. Install it, enjoy it, and look forward to a battery leak fix in the future."

We hate to say things like this, but we must emphasize that if you are going to root your phone and install this ROM, then you are doing it at your own risk. We are not responsible if your phone stops working!

Before we begin

  1. First of all, it is important to clarify that this software and procedure is for the international variant of Galaxy S3, I9300 only. To make sure you have the correct model, go to Settings > About Phone, where you should see the model number. If it's an I9300, move forward. In addition, the phone must be disconnected from the network.
  2. Secondly, it is a good idea to make backups of any important files or data that you might have on board your Galaxy S3 before moving on. You can manually connect your phone to a PC and extract what you need, or you can use a custom recovery tool like ClockworkMod or TWRP - these tools create an entire backup of your phone and you can restore it to the way it was if things go wrong or you change your mind (provided that the phone is not completely bricked, of course).
  3. Make sure your computer has updated USB drivers to connect to your phone.
  4. Make sure USB debugging mode is enabled on your smartphone. Go to Settings > Developer Options and check the Enable USB debugging" Note that if you can't see Developer Options, you can open them by tapping the software build number seven times.
  5. Make sure your phone is fully charged.
  6. Make sure you have microSD card in phone.

You must have received root rights to your smartphone!

Get the files

You must download the custom PA ROM:

  • ParanoidAndroid ROM

You should also download compatible apps Google, you have a choice of two sets:

  • Google App Files (template)
  • Google App Files (full)

Now stitch it!

Using these downloaded files, connect your phone to your computer with via USB. Copy the PA firmware and Google Apps archive files to the root folder of the phone's SD card - do not extract the files!

Now you can install the ROM using recovery methods either through ClockworkMod (CWM) or TWRP Recovery.

If you are using CWM

  1. Select "wipe data/factory reset". Then select "Yes" when prompted.
  2. Select wipe cache partition and confirm.
  3. Go to the CWM main menu. Click "Advanced" and then wipe the Dalvik cache and confirm.
  4. Select "Install Zip from SD Card" then "select zip from SD Card". Find the final ParanoidAndroid ROM file, select it and then confirm.
  5. Once this is done, select “Back” next to “Reboot system now” in the recovery menu. Wait for the phone to complete the reboot process, which may take up to five minutes.

If you are using TWRP

  1. Turn off your phone and wait 5-10 seconds until it turns off completely.
  2. Boot your phone into recovery mode by holding Volume Up, Home, and Power buttons simultaneously until the recovery screen appears. You can use the Volume keys to navigate through recovery options and the Power button to select an action.
  3. Click "Erase" and scroll down. Select "Reset to factory settings".
  4. Now select Erase > Advanced Erase and select System. Scroll down and select Swipe to Erase.
  5. Click install and locate the final ParanoidAndroid file on your SD card. Scroll down the screen and make a selection to confirm the firmware.
  6. Follow the same procedure for Google App files.
  7. Once the installation is complete, click “restart” and select “System.” The reboot may take up to five minutes.
  8. Note that if the phone gets stuck in boot loop, perform a factory reset from recovery mode.

Instructions for installing the official single-file firmware on the Samsung Galaxy S3 (GT-I930x).

    Drivers and programs

Attention!

To install the official stock firmware on the Galaxy S3 and return the phone’s status (“Settings” > “About device” > “Properties” > “Device status”) to “Official” after switching from custom firmware and thereby returning the ability to receive updates over the air, just follow the instructions provided.

Installation instructions

    Unpack the downloaded archive into a folder with Odin PC for convenience. The file in the ".tar" or ".tar.md5" format must be left, but the "SS_DL.dll" can be deleted.

    Reset your device.
    To do this, go to the settings tab " Accounts " to the section " Archive and reset", select the item " Reset device" and press the button " Delete everything" The phone will reboot.

    Run Odin PC as administrator.

    Put your device into download mode ( Download Mode).
    To do this, you need to simultaneously hold down the Volume Down key, the Home button and the Power button. Then wait until the phone reboots and agree to the warning by pressing the Volume Up key.

    In this state, connect the smartphone to the computer. In Odin the message “ COM».

    Click on the “ AP» and select the TAR firmware archive.

    Items " Auto Reboot" And " F.Reset Time" must be activated, A " Re-Partition"if active - must be disabled.

    Click on the “ Start" The firmware installation process will begin.

    At the end of the operation, if everything was successful, the message “All threads completed. (succeed 1 / failed 0)". The phone must be restarted manually by holding down the power button until the screen turns off. It may take up to 5 minutes for your device to boot up initially.
    ATTENTION!
    If the device does not boot for a long time or the data has not been reset, it must be performed from recovery.
    To do this, you need to simultaneously hold down the Volume Up key, the Home button and the Power button. After downloading, select " Wipe data/Factory reset", and then - " Reboot system now" If after these steps the device also freezes when loading, you need to reflash it again.

Related publications: