Setting up a Bluetooth headset on Android. Controlling sound from a headset (Android) How to use a Samsung bluetooth headset

How to use a Bluetooth headset? Despite the fact that such devices have been in wide demand for quite some time, the number of users is still growing every day. This is not strange, because wireless HandsFree is very convenient, even for listening to music at home.

But, before moving on to the question of how to use Bluetooth headset, you should understand what this is all about? After all, this is the basis that will allow you to better understand the operating principle of such equipment.

Description and features of Bluetooth technology: Video

What is a wireless headset

It is worth noting that there are a huge variety various types, types and options of similar accessories:

• Stereo or mono.
• Supporting different standards (2.1, 3.0, 4.0 and so on).
• WITH additional functions, for example, the ability to connect to two phones at once.
• Vacuum, liners and overhead, and much more.

To answer the question of how to wear a Bluetooth headset correctly, you should start from what type it is. For example, over-ear headphones are placed on the head and secured with a bow. If we are talking about vacuum ones, then they are inserted into the ear canal, just like regular earplugs.

The main rule is that you should be comfortable in them. In addition, you must be able to hear your interlocutor well during a conversation.

How to connect a headset to a phone or tablet

There is nothing scary or complicated here. As a rule, instructions are included with the headphones. But in any case, everything happens according to the same principle. Turn on bluetooth adapter on a smartphone. Now on the headset, find the power button and press it. Hold the button until the indicator flashes blue and red (color may vary depending on model).

If you don't have an indicator light, then simply hold down the power button for about 15-20 seconds. This will enable the discovery feature so that the phone can find and connect to the equipment. Now on your smartphone, go to the Bluetooth settings.

Here you will see a list available connections. Select your headset and click Connect.

How to connect Bluetooth headphones to a computer: Video

Charging the headphone battery

Since Bluetooth headphones require additional power to operate the adapter, as well as to play sound, it is logical to assume that there is a battery inside. Hence another question, how to charge a Bluetooth headset?

It should be noted right away that not every model has the ability to charge. In other words, some headphones run on regular batteries that cannot be charged. In this case, the interface for connecting charging is simply not provided and at certain moments you need to change the power source.

In addition, there are also options that come with a Docking Station. It also doubles as a charger.

But, such options have a higher cost. For the most part, Hands Free has a standard interface for connecting charging. He can be different types. Since nowadays the vast majority of smartphones and tablets use a connector micro USB, then it is recommended to choose a headset with the same interface. This will allow you to charge all devices with one power supply.

Listening to music on a wireless headset

Users often ask whether it is possible to listen to music through a Bluetooth headset. There really is no definite answer. The fact is that some models support Headset and A2DP functions. These features allow you to listen to music through a wireless headset, but are typically only available on stereo headphones.

If you use a budget option with one speaker, then in this case, in the usual way You won't be able to listen to music. But don’t rush to get upset. You can download and install the “Mono Bluetooth Router” program. The application allows you to use any type of Hands Free to listen to music. This is the answer to the question of how to listen to music through a Bluetooth headset.

FM radio is a separate issue. The answer to the question of how to listen to the radio via a Bluetooth headset is exactly the same as music. The main thing is that your smartphone or tablet has an FM receiver function. It's worth noting that certain headphone models have a built-in receiver, so you don't even need to connect them to your phone to listen to FM stations.

Wireless Bluetooth headphones are comfortable, convenient and an opportunity to always stay connected, even if your hands are busy. All that remains for you is to choose the right Bluetooth headset and connect it. It is important to know that to connect wireless headphones to a computer you need a Bluetooth adapter. Read what it looks like and how to choose it in this article.

Why the phone does not see the Bluetooth headset: Video

To listen to music through a headset on your PC without worrying about unnecessary wires, you need to know how to connect Bluetooth headphones to your computer.

The instructions below are in a universal way connection, which does not depend on the headset model or the type of PC ( or ).

After connecting the external adapter to the computer, everything will be downloaded from the manufacturer’s official website (Internet required) or, and an active Bluetooth tab will appear in the task manager.

Rice. 4 – example of using an external Bluetooth adapter

So, the module is operating in normal mode, which allows you to proceed to further connection setup. Follow the instructions:

• Go to the additional tab (arrow " hidden icons"). By default, the basic adapter management icon is located here. Click on the Bluetooth icon and in the context menu that appears, select the option to add a new device.

Rice. 5 – adding a new device via Bluetooth

• Now take your headphones. Press and hold the Power key until the colored power indicator lights up. Thus, you activate the gadget and it can be connected to a computer.

It should be noted that Bluetooth headphones use a color indication system to determine the status of the device. Depending on the gadget model and its settings specific color can show different condition. However, most manufacturers use red and blue diodes. They indicate the active operation of the device.

• In the Bluetooth device management window on your computer, wait for the name of your headphones to appear. This means that the computer has successfully identified the device. However, it is not connected yet;
• Now you should click on the headphones icon. The system will ask you to enter a passcode to confirm the connection. Type four zeros in the text field. This code is suitable for absolutely everything wireless headset;
• Wait for the connection to complete. As a result of a successful connection, the following message will appear next to the headset icon in the PC window: “Paired”.

Rice. 6 – setting up pairing between the gadget and computer

Step 2 – Connecting headphones and checking operation

In addition to successfully establishing a connection, some headphone models require additional configuration.

If you are unable to play audio immediately after pairing your devices, or experience intermittent problems, your system may not be configured to play audio.

Because of this, malfunctions occur.

Go to and open the audio playback manager window.

In the tab "Playback" select the priority device that will be responsible for playback.

In our case, click on “Headphones”. Confirm the action and exit the settings window.

Now connect your Bluetooth headphones again. From now on, there will be no glitches or stutters while playing audio tracks.

Rice. 7 – setting up the device to play sound in Windows

Connecting a wire free headset to Skype

If you connect bluetooth headphones to work with the program, please note that you need to additional settings headsets:

• Turn on the application and open the "Tools" tab;
• Click on the tab "Sound Settings";
• A set of parameters for work will appear on the right side of the window. In the “Microphone” field, select the Bluetooth device connected to the computer. For speakers, also choose a headset - it will be used not only for playback, but also for reading sound signals(like a microphone).

Rice. 8 – setting up reading and playing audio in Skype

Possible connection problems

If there is no sound from your headphones, check that the volume on your mixer is set to the correct level.

There is a separate field for headphones, do not confuse it with the speaker volume slider.

Rice. 9 - Adjusting headset volume

If you have made the connection, following all the tips and instructions described above, but the sound is not played, you should update the drivers of the connected device and the built-in adapter.

To do this, go to the device manager and right-click on the tab with bluetooth devices. Select from the drop-down list "Update configuration".

Rice. 10 – adapter driver update

This action will be performed automatically if there is an active Internet connection.

On the manufacturer's website and will install it. The procedure will take less than one minute.

Rice. eleven - automatic search and driver installation

If you are using an external Bluetooth adapter, you will need to update the drivers for the " USB controllers» in the same way as for a tab with a built-in communication device:

How to connect bluetooth headphones

How to connect bluetooth headphones to a computer. IF you already have built-in bluetooth in your computer, then you don’t need an adapter!

Perhaps the most popular and sought-after addition to a smartphone is headphones. They are used by everyone - from teenagers to retirees. Some people listen to music through them in transport, others conduct telephone conversations without using their hands. Manufacturers of mobile devices often include headsets with smartphones, recognizing the convenience and practicality of this accessory.

Using headphones is a simple matter; you just need to insert the plug into the socket on the body of your smartphone, tablet PC or other mobile device. Even preschoolers can do this. However, few people know that headphones can sometimes do more than just transmit sound. By using software they can be taught various interesting tricks. Today we will talk about how you can “upgrade” a popular accessory using applications for your Android smartphone.

But before we get into the software review, it's worth mentioning some pitfalls. IN mobile world Confusion reigns due to the incompatibility of wired headsets. At first glance, almost all smartphones have the same connection - via connector designed for 3.5 mm TRRS mini-jack. But in reality the situation looks confusing.

This plug has four metal contacts (four-pin connector) and is used both on headsets for iOS devices and for connecting mobile headsets compatible with the Android platform. In both cases, the connector is the same, but the wiring and the principle of identifying control signals are different. Therefore, if you connect an iPhone headset to an Android smartphone, you most likely will not be able to take advantage of all its functions. In some cases, you can resort to special adapters or, armed with a circuit, try to do some magic yourself with a soldering iron and solder. Ordinary gaming computer headset in many cases you can connect to a smartphone using a simple adapter. Technical details, information on connection standards and connection diagrams of the different TRRS standards can be found, for example, .

⇡ Philips Headset: training the remote control of a mobile headset

Each headset model is individual - it has a special fit, has a certain power reserve and sounds with a characteristic timbre. And sound defects can be veiled using frequency correction of sound. Moreover, some manufacturers, such as the popular Philips brand, offer special applications for “upgrading” headsets.

Philips Headset will help make the sound of this brand's headsets more pleasant. The application is being developed by Gibson Innovations Limited, a company that for some time now owns the right to produce audio products under a well-known name. Despite the fact that the Philips Headset application is initially aimed at Philips headphones, it can be successfully used with mobile headsets from other manufacturers.

The Philips Headset displays a sort of sound palette on the screen, on which you move a slider. The position of this slider determines the sound character of the headphones. For example, in the upper left corner of the palette the sound will have rich low frequencies, in the lower right corner - high, in the center the sound will be “balanced”, etc. The small program database contains a set presets sound for some Philips headsets.

In the program settings, you can determine which application will automatically launch after connecting the headset - a music player or a radio.

Almost all modern wired mobile headsets are equipped with a remote control for controlling your smartphone and receiving incoming calls. Most often they are either one-button, for making incoming call and end the call, or three-button, where two additional buttons control the playback volume. The presence of a remote control for controlling a smartphone significantly affects the cost of the headset, and the “multimedia” version of the remote control with three buttons, of course, costs more than the version with one button. But there is a way to get by with a remote control with one button without losing functionality - using the same Philips Headset application. In the program settings, you can select player control commands and assign them to the specified number of clicks function key remote control - once, twice, three times.

While wearing the headset, the button may be accidentally pressed against clothing. If you assign volume commands to it, such presses may cause the sound to be louder at random. Imagine that you just wore a headset around your neck for a while, then put it on and a loud sound hit your ears. To prevent this from happening, the application provides an option to limit the volume level. By choosing the most acceptable sound level for yourself, you can be calm - your ears will no longer be under stress.

⇡ Headset Droid: alternative functions of the headset remote

If you feel like the Philips Headset app doesn't have enough settings, install Headset Droid. This program is paid, but it has many more options for controlling the buttons on the headset remote. Headset Droid not only allows you to assign specific commands to the function keys on the remote control, but also provides the ability to set a time delay so that the device more accurately determines the sequence of keystrokes.

The program allows you to use successive presses of a function key (up to four), and can also activate functions by pressing a key for a long time. To make it more convenient to control your smartphone, each press or execution of certain functions (increase the volume, launch an application, etc.) can be accompanied by a sound signal.

Headset Droid will also allow you to use the remote control to check the time and announce the caller's name. When it works voice engine, the application mutes the player and ringtone. It can also perform certain actions when connecting and disconnecting the headset: start playing a track, rewind to a new track, open applications, tell the time, set a certain volume level, etc.

Headset Droid can use a combination of presses to mute the microphone and control the commands “accept”, “reject”, “end call”. Buttons for controlling the volume on headsets for iPod/iPhone cannot be configured in the program due to hardware incompatibility (Apple, as usual, has patented this little detail).

⇡ Tunity: turning the headset into wireless headphones

The absence of wires when using headphones is a definite plus; many would like to have a pair of wireless headphones. With these headphones, you can sit comfortably on the sofa and watch TV without getting tangled in a long cable.

Of course, a mobile headset with a smartphone will not replace real wireless headphones, but if you install the right software, you can watch TV with the same comfort without thinking about wires. In this case, the headset is used, of course, to output sound, and the smartphone serves as a receiver. Of course, this will not be as convenient as with real wireless headphones, where the built-in receiver is completely invisible (which cannot be said about a smartphone). But on the other hand, you don’t overpay for comfort, and the “receiver” itself won’t take up much space in your pocket. “Where will the smartphone receive the TV signal from?” - you ask. From the Internet! The Tunity service will come to the rescue.

Having installed the application of the same name on your device, point the gadget’s camera at the TV screen, after which the program will take a photo and send it to the server.

Next, the service will identify the television channel and connect you to the online broadcast of audio. The time delay can play an unpleasant joke - because of it, the sound may not match the image. Especially for this, the program provides an option to manually adjust the sound to the image.

The idea is interesting, you will agree. You come to a bar or fitness center, where the TV is on with the sound turned off, take out your smartphone and tune in to desired channel. However, there is one big fly in the ointment - the list of supported channels is very limited, only English-language programs are available. However, the creators of this project promise to certainly expand the geography and number of identifiable broadcasts.

The Tunity app can be installed on both Android devices and iOS smartphones.

⇡ WiFi-earphone for PC: listen to the computer via a smartphone

This application is another attempt to make headphones “wireless” using a Wi-Fi network and a smartphone. This time the developer offers a way to communicate between a computer and mobile headset. To use the WiFi-earphone for PC application, you need to download and install two parts of the program: a client for a smartphone and a desktop application on a PC, which will broadcast audio over the network. The application works stably and requires virtually no configuration. All the user needs to do is specify the computer’s IP address and click the Connect button.

The connection is protected by a password, which can be generated automatically by the program or assigned manually by the user. In addition, WiFi-earphone for PC can automatically scan the network and show addresses available for connection.

In networks where the channel is heavily loaded, as well as in cases where the data transfer speed is low, you can switch to low bitrate mode. In this case, the audio quality will deteriorate slightly.

The computer application runs in background. It places its icon in the system tray and, if necessary, can display the type of connected device - smartphone model. Unfortunately, the application is paid, but the trial version gives a good idea of ​​its capabilities. The limitation of the trial version (besides the presence of advertising) is that each new session of connecting to a computer can last no more than five minutes.

⇡ Stereo Test: checking the headphone cable

No matter how good the headphones are, their service life does not last forever. There will come a time when the cable frays, and you will have to pick up a soldering iron or buy a new headset. When the wire begins to deform at the bend, there is a possibility that the right and left channels will be short-circuited, resulting in loss of power. stereo effect. To test the left and right channels separately, you can use the simple Stereo Test application. The same program can be used on balanced headphones to accurately determine where the right channel is and where the left is. If you use a headset that is not compatible with your smartphone, the channels may change places. Stereo Test will easily help you understand if this is so.

⇡ Headphones Equalizer: calibrate headphones

No self-respecting connoisseur good sound will not take various kinds of frequency filters and equalizers too seriously, considering that they more or less spoil the original sound by adding distortion. There is some truth in this, but some benefits can also be found from applications that correct the sound of a smartphone.

For example, if you like to listen to audiobooks, you have probably encountered the problem Low quality digitization of well-read audio material, especially in amateur performance. Audiobooks created by teams of enthusiasts and posted on torrents often have a sharply cut spectrum, replete with noise. And if the source of digitization was a chewed magnetic film “from the time of the Ochakovskys and the conquest of the Crimea,” it can be very difficult to make out the words of the speaker on the recording. This is where an equalizer comes in handy. They can, for example, cut off high-frequency interference, raise mid frequencies or remove excessive low frequencies, and emphasize the voice. The sound quality after processing will not become radically better, but the speaker's speech will be more intelligible. But what equalizer should you choose?

You will find a lot of tools for sound correction in the application store, and many players also have their own tools for processing sound in real time. But all these options work, so to speak, in “blind mode”, without taking into account the acoustic characteristics of the headphones.

But in Headphones Equalizer everything is different. The application has an exceptional feature: it tries to calibrate the audio signal by analyzing the sound of headphones through the smartphone's microphone. This is done with the help of a wizard in several stages. First the program checks for the presence background noise, and then tries to determine the frequency characteristics of the headphones by recording a control tone that varies in frequency. If the control test fails, you need to increase the volume.

The application detects blockages and humps in the frequency response of the headset and adjusts the equalizer in such a way as to compensate for the shortcomings of the model used.

The application allows you to store several profiles at once with settings for different models headphones, the number of these profiles is not limited. The program can also be used as a regular equalizer, adjusting audio by eye.

And Headphones Equalizer has a nice addition for those who firmly believe in the benefits of warming up headphones (by the way, we recommend looking at the material “Looking for a warm sound: should you warm up your headphones?” on this topic). Using a noise generator, you can warm up your headphones directly in this program. And not just like that, but one of two types of noise - white or pink (white is probably for boys, pink for girls). During the warm-up process, Headphones Equalizer will count the time spent “baking”. A couple of weeks of warming up, automatic correction using the microphone built into the smartphone and... it’s scary to think how the headset will play after that.

⇡ “Checking your hearing”: how well do you hear?

It's no secret that wearing headphones for a long time has a negative impact on human health. Constant load on the organ of hearing leads to the fact that a person’s sensitivity to sound perception decreases. If you care about your health, remember that loud noise is a direct path to deafness. In order to pay attention to the emerging disease in time, you should regularly check your hearing with a doctor. Or, as a last resort, use your smartphone. In the app store Google Play can be found special application, which is called “Checking your hearing.”

The program is based on the principle of pure-tone audiometry - a technology for determining threshold frequency values ​​audible by the human ear. Simply put, the program generates a tone, and the user marks the audible sounds by pressing a button. As a result of a series of such measurements, a graph is drawn up, a simplified frequency response of the hearing aid.

By periodically taking this test, you can see (or better yet, not see) deviations from the norm. The first test is a calibration test. It is advisable for a person with perfect hearing to take it. The program keeps visual statistics of checks, which can be used to assess the current condition of the “patient”.

Honestly, we think that this application cannot guarantee an accurate hearing test, because the results are greatly influenced by the hardware - what audio path the smartphone has, what headphones are connected, etc. Therefore, you don’t have to look at the numbers at all, the error is too large. On the other hand, the developers claim that you can do the test even with headphones, which usually come with your smartphone. Before the hearing test, you need to indicate whether you are using “native” headphones, and if so, the program will use correction factors specifically for the model of the smartphone you are using (if, of course, this data is found in the database. For Lenovo smartphone A680, for example, there were none). In this case, calibration is not required.

Believe it or not - it's up to you. In any case, if the program is calibrated and the test results show that your hearing is worse than that of a person whose hearing you consider ideal, there is a reason to go to an otolaryngologist.

Conclusion

Smartphones keep many secrets, and we don't even know half of all the capabilities hidden in our pocket assistants. They are modified, new areas of application are invented for them, turning them into measuring device, then into the key to open the lock. But such a familiar accessory as headphones can also be made a little better. You just need to learn to think outside the box, and you can come up with a variety of applications, from a hearing tester to a wireless audio receiver.

Instructions forBluetoothheadset

Charger:

The headset has a built-in lithium battery; charge the battery until full charge before use.

2. Connect Charger to the headset, via the charging port.

3. During the charging process, the LED indicator will work, after the battery is fully charged, the indicator will go out.

Note:

1. A full charge takes about 90 – 120 minutes.

2. When charging for the first time, charge the device for at least 4 hours.

3. Carry out the first 3 charges only after the headset is completely discharged until the headset is fully charged.

4. The device will charge at temperatures from -10 to +45 degrees Celsius.

On/off:

1. Hold the “On” key pressed for about 3 seconds until the indicator turns on, the device will be turned on.

2. To turn off the device, hold the “On” key pressed for about 3 seconds; After the indicator flashes 3 times, the device will be turned off.

Creating a connection with mobile phone:

1. Before you start creating a connection, make sure that the headset is turned off.

2. Turn on the Bluetooth function on your phone.

3. Hold the “On” key pressed for about 5 seconds; the indicator will flash red and blue alternately (for Jabra and Motorola headsets the indicator will be constantly on), this means that the device is in connection mode.

3. Search for new Bluetooth devices on your phone.

4. In the mobile phone device window you will find the inscription “SANYO BL812”, “Jabra” or “Motorola”.

5. Select "SANYO BL812", "Jabra" or "Motorola" and create a connection.

6. Enter the connection PIN code 1234 For "SANYO B.L.812" or 0000 For "Jabra" and "Motorola", press the “yes” button, the indicator will stop flashing alternately in red and blue, and will start flashing blue (for Jabra and Motorola headsets, the indicator will stop constantly flashing blue and start flashing blue). This means the connection was successful.

7. After connecting the headset to the phone, be sure to restart the headset (turn it off and then back on after 10 seconds).

8. Now the headset will be in ready mode, you can make and receive calls.

Note:

1. If a connection is not created within 90 seconds, the headset will automatically go into standby mode. However, you cannot use the headset. Repeat steps 1-6 to create a connection.

2. When creating a connection; The recommended distance between devices is less than 1 m. There should be no metal obstacles between the devices. This headset has a PIN code of “1234” or “0000”. Different mobile phones have different ways settings, refer to your phone model's manual for instructions.

3. If a connection is created, it will be maintained even under the following circumstances:

1) the device will be turned off

2) one of the devices stopped working

3) one of the devices will be rebooted

How to receive calls:

1. When you receive a call, press the “Talk” key after you hear the call.

How to end a conversation:

1. After finishing a call, press the Talk key to end the call.

2. You can also wait until your interlocutor disconnects, then you will disconnect automatically.

Redial last call:

1. If your phone has the “Last Call Redial” function, you can use it using a headset.

2. The function is activated by double pressing the “Talk” key.

Volume control:

1. To increase the volume, press the Volume+ key.

2. To decrease the volume, press the "Volume-" key.

The manufacturer of micro-earphones is NANO phones.

Representative of NANO phones company in Nizhny Novgorod.

Make sure that the phone to which you plan to connect a wireless headset is equipped with Bluetooth, a wireless data transfer technology. If your phone does not have this technology, you will not be able to connect a wireless headset to it. You can check the presence of Bluetooth in your phone by reading its instructions, or by looking at the phone menu.

Turn on your wireless headset. On it, you need to press the multifunction button and hold it until the operating mode indicator turns on. Then you should turn on the phone with which you want to connect the headset and turn on Bluetooth. In the Bluetooth menu, you need to run the search command for compatible devices. The scanning process, depending on the speed of Bluetooth on the phone and headset, can take from several seconds to a minute.

Once the scan is complete, a list of compatible equipment will become available. From there you need to select a wireless headset. You may need to enter a passcode to transfer data via Bluetooth. In this case, you need to enter the code specified in the instructions telling you how to set up the wireless headset. Usually this is 0000. After entering the code, a connection will be established with wireless headset. You will only need to enter the code the first time; it will not be required in the future.

When the connection between the phone and the headset is successfully established, the indicator on the headset will begin to blink. Now you need to go to the Bluetooth menu, then to the list of paired devices and select a wireless headset. So, the headset is connected and ready to go. Such manipulations need to be performed only once. In the future, you just need to go to the Bluetooth menu, then to the list of paired devices and select the headset.

If you don't know how to set up your headset to connect to your computer for Skype, try the following steps. First, you need to switch the headset to discovery mode. Secondly, run a program on your computer to search for Bluetooth devices. If there is a “Bluetooth environment” shortcut, you need to click on it, and if not, right-click on the Bluetooth icon and select “open Bluetooth environment” or “Add device”.

Next, you need to carry out the process of pairing Bluetooth devices. The last step is to launch and Skype setup for working with a wireless headset. To do this, you need to open the application settings: Tools, then Options, and then Sound Devices. In the Audio Out and Audio In fields, select Bluetooth Audio. In order to start communicating, you need to activate the connection between the headset and the computer. To do this, open the “Bluetooth environment” and double-click on the headset icon.

Some users of older phones encounter difficulties installing the headset. The interface of these devices is far from perfect, but they are reliable, inexpensive and therefore still popular. In this article you will learn how to set up a Bluetooth headset to work with some popular brands of phones.

How to set up a headset: instructions

First of all, make sure that both your phone and headset are turned on. After that, put the headset into device search mode.

On the M2500 headset model from Platronics, this is done by setting the multifunction wheel to the “up” position and pressing the call button. If you have an M3000 or M3500 headset, then you also need to move the wheel up, then press the answer button and lower the volume control knob. Until green and red flash LED indicators headset, do not change anything in its settings.

Phone setup

After setting the headset to search mode, you need to configure the phone. To do this, select “Search for Bluetooth headsets” in its menu. When the phone and headset detect each other, you need to indicate the headset model in the mobile phone menu. In the example described, it will be “M2500 by Plantronics” or “M3000/3500 by Plantronics”. The setup procedure for some specific phone models is described below.

When your phone prompts you to enter your password, dial “0000.” The headset is now configured and paired with your phone. If, after several attempts to set up the headset, you are unable to connect it to your phone, you need to contact Plantronics support. Now we’ll touch on in detail how to set up a Bluetooth headset on individual phones.

Siemens S55

Press the key located under the word Menu, which is present on the screen. After this, move the cursor to "Setup" and press the "Select" button. Switching with the down and up buttons of the joystick, select the "Connectivity" item, open the "Bluetooth" sub-item in it, select "Options" and then "Activate".

Next, in the "Options" menu, select "Search for" and click "Access". At the same time, Bluetooth devices will appear on the screen. Select from them M2500 (3000/3500) Plantronics and press "Select". The phone will now ask you for a password. You need to enter, as already mentioned, “0000” and click Ok.

Nokia 6310

Go to the phone menu and select Bluetooth there. Select "On" and press "Select". After this, the phone will see your headset if it is in search mode. Select it (M2500(3000/3500) Plantronics) and press "Select". After which you will be asked to enter a password (“0000”).

Ericsson T39

With your phone turned on, visit the "Extras" menu and click "Yes". Now look for the “Bluetooth” section, select “Operation Mode” in it and set it to “On”.

To search for nearby Bluetooth headsets, go to "Paired Devices". Select the option "Add Device" - "Phone Initiates" -> "Headset". Then select your headset from the list of devices that appear, enter the password “0000” and click “Yes”.

How to connect a garnish to a computer

Before setting up the headset on your computer, you need to connect the Bluetooth adapter to the USB port and install the driver for it. Now put the headset into search mode, just like you did when connecting it to your phone and follow these steps.

• On the Bluetooth tray icon, right-click and select from context menu item "Bluetooth Setup Wizard".
• From the new list that appears, indicate “I want to find a specific Bluetooth device...” and click “Next”.
• The computer begins searching for Bluetooth devices nearby. It is important that the headset remains in search mode at this point. If suddenly it exits this mode, launch it again, and on the computer click “Search Again”.
• When the headset is found and its name appears on the computer monitor, double-click on it.
• A window will appear asking you to enter your PIN. Enter "0000" and click the "Initiate Paring" button.
• The available services for the headset should now appear on the screen. Check the box next to each of them and click the “Finish” button.
• Now, as soon as you press the answer button on the headset, it will connect to the computer as an audio device. Another way to connect it is by right-clicking on the Bluetooth icon in the tray and selecting the submenu "Quick connect" - "Head Set" - "Headset". Using the same steps, the headset is disconnected from the computer.

The headset is connected to the computer. Now, in order to communicate through it on Skype or listen to music through it, you need to set this device as the default one in Skype or Windows, respectively.

After purchasing a Bluetooth headset, many users encounter certain difficulties in pairing it with a mobile phone and further setting it up. This problem is due to the fact that not all models of wireless headphones can work with music files. Therefore, let’s look at how to set up a Bluetooth headset on Android so that you can use it not only to make calls, but also to listen to audio.

Initial setup of the Bluetooth module

Before you start using hands-free, when you connect it to your smartphone for the first time, you will need to pair two devices: an Android and a Bluetooth headset. To do this, it is necessary that the mobile device has the ability to wireless transmission information via radio channel.

The initial setup of the Bluetooth headset is as follows:

After successful pairing, the recognized headset will appear in the “Connected devices” section.

Now, in order for the sound when making calls to go not to the smartphone speaker, but to the Bluetooth earphone, in its settings you need to check the “Sound during a call” item. Checking the box next to “Multimedia Sound” will allow you to listen to all multimedia files hands-free.

Playing music via Bluetooth headset

Some wireless headphones are not provided by the manufacturer with the ability to broadcast a multimedia stream. Such products are used only for talking during telephone calls. Such restrictions are laid down at the software level, so they can be circumvented using special software.

One of the programs that allows you to expand the functionality of a wireless headset is Mono Bluetooth

By activating media redirection via Mono Bluetooth, your earbud will always be active and play sounds from audio and video players, games, system applications and so on. This greatly drains the power supply of the headset. Therefore, if unnecessary this program It's better to turn it off.

Problems connecting a Bluetooth headset after updating Android

Many owners of smartphones and tablets, after upgrading the software, encounter malfunctions in the operation of certain modules on mobile device. If the updated Android completely refuses to work with wireless earphone, it can be argued that the problem is software in nature. However, solving it can sometimes be quite difficult. This is due to the fact that the radio module does not have its own settings - they are built into the system and are closed from external interference. Therefore, separately update or roll back the parameters Bluetooth module you won't succeed.

The following steps will help restore Bluetooth functionality after upgrading Android.