When will the new firmware for Samsung Galaxy be released? When the new firmware comes out for the Samsung Galaxy Note 2, the firmware is not updated

A set of guides for updating the factory system, flashing amateur-assembled firmware, recovery and obtaining root rights to redmi note 2.

Attention! The instructions are posted for informational purposes. The author and resource are not responsible for a damaged phone due to misunderstanding and lack of experience.

Comments, inaccuracies and suggestions, write below in the comments block.

Installing standard firmware through the “Update” section

This method is solely for updating your existing official firmware. Way doesn't fit to switch from Chinese version to European version or vice versa, as well as a localized official assembly. Such images can only be installed via TWRP.

For a detailed description of the installation, read our separate article. You just need to download the appropriate firmware. Rename the archive to “update”; there is no need to unpack the firmware. Be sure to turn on the Internet for verification.

If your phone has TWRP installed instead of standard recovery, download any modified or localized firmware. Remove the folder from the firmware recovery, to prevent the modified recovery from being replaced by the standard version. Installation process: update – button in the form of three dots – “Reboot to recovery” item. After starting the mode, specify the path to the firmware.

Installing TWRP via Flash Tool

Download the archive with the program, then extract it to the root local disk. ADB, drivers.
Run Flash Tool, in the window, click on the “Download” button. Download Android_scatter from the TWRP folder if it doesn't happen automatically.
Using a USB cable, connect your phone without battery with a computer.
A red bar will appear.
After that, the red bar will change to yellow and a window with a successful installation will appear.
Remove the USB cable, insert the battery and turn on the phone using the combination of “ON” and “Volume+”. Hold the buttons until the MI logo appears.
On the first screen that appears, click the "Mount" button. Check the box next to “Never show this screen during boot again” to prevent the window from appearing in the future. Next, select “Reboot” and then “System”.

Installing firmware via TWRP

This method allows you to install third-party images, add-ons and other modifications. Before starting the firmware, save all personal information from the internal memory.

Instructions:

Place the archive with the firmware on the memory card.
Boot your phone into TWRP.
Clear all data except the memory card and OTG.
Return to main screen and install the firmware.
After installing the firmware, perform a cleanup and reboot the device.
It will take 15-20 minutes to install applications. During this time, do not touch your phone.

Obtaining root rights on custom firmware

After changing the firmware via TWRP, some assemblies are missing root rights. To grant rights, do the following:

Install the program .
Open the program and update the binary file.
From the options available, select " Fine».
After the error message, return to the main screen and launch the Security program.
Select "Permissions".
Next is the “Root access” item.
In the new window, click the switch next to the SuperSu program.
A warning window will appear asking you to allow access.
Open SuperSU again and update the binary file normal way.
After installation, reboot the device, and also include SuperSU in startup.

Alternative installation method via MiFlash

Installing official firmware

This method allows you to update official firmware, relevant if standard way, described at the beginning of the article, did not work.

Procedure:

Download and install the MiFlash program.
Download the archive from global version system under Fastboot.
Unpack the archive and run the MiFlash program.
Move your phone to Fastboot mode, the key combination “ON” and “volume down”. Connect to your computer using USB cable.
In MiFlash, specify the path to the firmware to be installed. Select the “Flash all” option to install the entire image, removing personal data.
To install, click on the “Flash” button.

Installing TWRP and getting Root

Install the program if there are no drivers on your computer.
Download and then extract the TWRP archive.
Move your phone to and connect to your PC.
Run the attached file “RUN ME to flash recovery”.
The installation process will take a couple of seconds. When finished, disconnect the cable and enter TWRP using a combination of the “ON” and “Volume Up” buttons.
When you turn it on for the first time, allow recovery to make changes to the system partition.
Go to the "Backup" section, where you create backup copy system, data and nvram. It is recommended to place one copy on a memory card and the second on your home computer.
Reboot into the system. At the exit, TWRP will ask you to install SuperSU for getting root. Or use another method described above.

There was a need for an update Galaxy Note 2 N7100 to latest version Android, but the official developer of the available options cannot yet offer? Custom firmware will come to your aid. Next you can find Full description And step by step instructions about how you can update your gadget's operating system to Android versions 4.4.2 KitKat using a custom Phoenix ROM.
Judging by the reviews, this update option is the most stable and reliable, unlike its analogues. Compared to standard firmware from official developers, Phoenix firmware has its advantages. This may seem surprising, but this version is faster, while energy consumption is slightly reduced. That is, thanks to installing such an update, you get high system performance and maximum “survival” of your device.

To prepare the device for updating, you must complete several mandatory procedures described below.
It's worth starting with the opening full access to your gadget or, as they also say, . This has its drawbacks, since the procedure is essentially invalid. This will automatically void your Note 2 warranty. You need to restore it by returning to factory restrictions, as well as by installing the latest official version Android firmware. After this, it is imperative to unlock the loader (bootloader) and install custom recovery (or).

If the information stored on your phone is very important to you, then you need to make this data. Installation of this firmware requires complete removal information, so you need to think about the need to save important contacts, favorite programs and other useful information.
In addition, you need to create something like a system restore point (called a Nandroid backup). If there was a fatal error during the installation process, or Phoenix simply did not live up to your expectations, this feature allows you to revert to a previous version of the software.
Before installation, prepare a USB cable and turn on the computer.
Be sure to turn off everything antivirus programs on your computer and device.
The installation process is quite long, so you need to properly charge the phone before starting the firmware.
. To do this, you need to enter the “menu”, select the “settings” item, and click on the “developer options” line.
This firmware instruction is only suitable for Galaxy smartphone Note 2 (model N7100).

Installation latest update Android on Galaxy Note 2 N7100 using Phoenix ROM firmware.
1. Download it yourself and place the archive on your PC desktop. We leave it packaged!
2. Using a cable, connect the phone to the computer.
3. We send the archive to the smartphone’s memory card.
4. Disconnect the cable from the computer.
5. Turn off Galaxy Note 2.
6. After this, you need to start the device in recovery mode.
7. Next, erase absolutely all data on the phone and clear the cache memory ( wipe data factory reset and wipe cache partition). To erase Dalvik Cache, select the option advance, and after that wipe dalvick cache.
8. The next stage is the actual installation of the firmware itself. In the main menu you need to select installation from the archive (item " install zip from SD card"), and then " choose zip from SD card" Open the update installation file and download it.
9. Upon completion of initialization, return to the main menu of the device and reboot it ( reboot system now).

Updating the operating system version Android themes- a topic that is difficult to discuss even for the most devoted fans of the green robot. The reason for this is that manufacturers themselves determine the list of models suitable for the update and the release date of the update. For example, representatives Motorola working properly, and members of the HTC team promise to update their flagship, but do not invest in it on time. How is Samsung doing with this? Do managers plan to take care of relatively old devices? Let's find out.

As mentioned above, the update release date is different for each device. That is why many users do not lose hope and are confident in their hearts that one day their device will offer to install an update. However, not everyone can boast of such patience.

Many device owners want to be aware of the company’s plans, and therefore ask about them directly. According to representatives of the resource phonearena, this was done this time too. Users social network Twitter asked about the probability Android release Lollipop for Galaxy Note 2 and Galaxy S3.

Unfortunately, the answer was no. The leaders of the Twitter account of the British branch of Samsung reported that none of the devices mentioned above will receive the desired update. Of course, we were talking about smartphones purchased in the UK, but this does not add confidence in the release of updates for other countries.

Let us remind you that the Galaxy Note 2 can boast of having 2 GB random access memory and quad-core Exynos 4412 with a clock frequency of 1.6 GHz. In the case of the Galaxy S3, the RAM is exactly half as much, and clock frequency The processor is reduced to 1.4 GHz.

Are you disappointed by this news? Or was it too presumptuous to wait for an update to come out for such old devices? Share your answers below.

Xiaomi Mi Note 2 was released in October 2016. Here we will discuss the release of Android 9.0 Pie update for Xiaomi Mi Note 2.

Finally, Google released the ninth iteration of Android OS under called Android 9.0 Pie. The update is available for Pixel supported devices and several other OEM supported Android Beta devices. After Android users received four beta versions of Android P, Google called Android 9.0 as Android Pie. In the coming months, all devices that have been enrolled in the Android P beta program, including OnePlus 6, Oppo R15 Pro, Vivo X21 and others, are expected to be the first to receive Android update P.

If we talk about the specifications, the Xiaomi Mi Note 2 has a 5.7-inch display with a screen resolution of 1080 x 1920 pixels. It is equipped Qualcomm processor MSM8996 Snapdragon 821 combined with 4/6 GB of RAM. The phone has 64/128 GB of internal memory. The camera on the Xiaomi Mi Note 2 features a 22.5-megapixel rear camera and an 8-megapixel front camera. It has a 4070mAh non-removable Li-ion battery with fast charging battery (Quick Charge 3.0). It also has a fingerprint sensor on the front.

When will Xiaomi release Android 9.0 Pie update for Xiaomi Mi Note 2?

There is currently no custom Android firmware 9.0 Pie for Xiaomi Mi Note 2. So stay tuned for more information about this update.

What is Android 9.0 Pie?

Android 9.0 Pie is the ninth iteration and major update to Google's Android OS. New Android Pie brings a couple of design changes to the successor to Android Oreo, but the most noticeable is navigation system based on gestures. Other features of Android 9 Pie are new design user interface Quick Settings, redesigned volume slider, extended battery support artificial intelligence, rounded UI corners, improved adaptive brightness, manual theme selection, Android Dashboard, which Google calls Digital Wellbeing (Digital Wellbeing is designed to help you use your phone less, and that's why Google provides statistics to help you know how much you're using your phone during the day, in which applications you spend the most time), and other functions.

Want to try Android 9.0 Pie on Xiaomi Mi Note 2?

If you want to enjoy Android features 9.0 Pie, follow the guide below.

Make sure you have an unlocked bootloader and installed TWRP Recovery on Xiaomi Mi Note 2.

Instructions:

Supported on Xiaomi Mi Note 2.
Download.
Download for any Android devices.
Best: I like Flux.
Download Volume Slider Android Pie: Free | paid.
Enjoy Android 9.0 Pie features on your device.

You can also wait for Lineage OS 16.0, which will be based on Android 9 Pie.

Until now, the Galaxy Note 2 phablet is one of the most interesting smartphones in their niche and many are unlikely to decide to change even with the advent of the Galaxy Note 4. However, technology has come very far over these two years, and updates from manufacturers are unlikely to appear at all, and hopes for obtaining new features are associated only with custom firmware.

The Galaxy Note 2 just received a custom firmware build called Ditto Note 4 (DN4). This will allow you to get a real Note 4 from the Galaxy Note 2 after installing the firmware. Of course, all this only concerns changes in the interface and functions.

If you dare to install Ditto Note 4 on Note 2, then almost all of the proprietary features of the new flagship will become available - this also applies to the power-saving mode, the new panel quick access, updated Air Commands interface and more. The DN4 firmware itself runs on Android 4.4.4 KitKat, and its installation is quite standard - download the zip file and install using custom recovery, or using Odin.

By the way, you can download the DN4 firmware file for the Galaxy Note 4 here: download.

Before you begin installation, you should prepare and follow the following instructions:

Check the model number of your smartphone, as the instructions are only for the Note II (GT-N7100) model: Settings/About phone.
If you have a smartphone of a different model, then the instructions are absolutely not suitable, and if you try to update your smartphone with another firmware, you can “brick” it.
Galaxy Note 2 must be rooted, with custom recovery TWRP or CWM.
You will need to back up your system and then do a Factory Reset - never skip these steps.
You will need a Nandroid backup in case you want to roll back to previous version operating system, that is, when the flashing process fails.
Factory Reset will completely erase your data, but if it is important for you to save all SMS messages, installed applications and photographs.
Sync with Gmail so you don't lose your contacts.
Be sure to carefully read each step of the instructions, do not skip steps to do the flashing the first time.
You are responsible for all actions and in case of failure we are not responsible.
Check the battery charge. Recharge the phablet to at least 50, and preferably up to 80%.

Now that you know all of the above, you can proceed to the practical part of the article and successfully install Android 4.4.4 DN4 on Note 2.

Installing Android 4.4.4 DN4 on Note 2:

1. Download Android 4.4.4 DN4 from this link: download.
2. Connect your Galaxy Note 2 to your computer with via USB cable and copy the firmware file to the smartphone’s memory. Do not unpack the archive under any circumstances! Do not disconnect your smartphone while copying!
3. Now disconnect your smartphone from your PC and turn off your Note 2.
4. Boot Galaxy Note 2 into recovery mode: Home + Power + Volume Up button.
5. Firstly, make a system backup (Nandroid Backup): in CWM, select " backup and restore", specify the name of the backup file and confirm your choice; In TWRP, click on “Backup” and confirm your choice.
6. Now you need to do a Factory Reset: in CWM, select “wipe data / factory reset” and confirm; In TWRP, select “Wipe” and confirm your choice.
7. After this, you need to install our firmware: in CWM, select “install zip from sdcard” and “choose zip from sdcard”; In TWRP, click "Install".
8. Specify the Android 4.4.4 DN4 zip file and confirm installation.
9. Reboot the phablet and boot it into normal mode. The first download will take a little longer, so wait until it finishes.
10. You will need to enter your gmail account information in order to continue working with the Galaxy Note 2 N7100.