How to use MorphVOX Pro. How to change your voice in Skype with MorphVox Pro Setting up morphvox pro for skype
The MorphVox Pro program is used to distort the voice in the microphone and add for it sound effects. Before you can transfer your voice, moderated using MorphVox Pro, to a chat or video recording program, you need to set up this sound editor.
In this article we will touch on all aspects of setting up MorphVox Pro.
Launch MorphVox Pro. A program window will open in front of you, which contains all the basic settings. Make sure the microphone on your PC or laptop is activated.
1. The Voice Selection area contains several pre-configured voice templates. Activate the desired preset, for example, the voice of a child, a woman or a robot, by clicking on the corresponding item in the list.
Make the “Morph” buttons active so that the program moderates the voice, and the “Listen” button so that you can hear the changes.
2. After selecting a template, you can leave it as default or edit it in the “Tweak Voice” box. Add or decrease pitch using the Pitch shift slider and adjust the tone. If you want to save changes to the template, click the "Update Alias" button.
3. Use the equalizer to adjust the frequencies of the incoming audio. The equalizer also has several customized patterns for lower and higher frequencies. Changes can also be saved using the “Update Alias” button.
Adding special effects
1. Set up background sounds using the Sounds box. In the "Backgrounds" section, select a background type. By default, two options are available - “Street Traffic” and “Trading Floor”. More backgrounds can also be found on the Internet. Adjust the sound using the slider and click the “Play” button as shown in the screenshot.
2. In the “Voice Effects” box, select effects to process your speech. You can add echo, reverb, distortion, as well as vocal effects - growl, vibrato, tremolo and others. Each effect is customizable. To do this, click the “Tweak” button and move the sliders to achieve an acceptable result.
Sound settings
To adjust the sound, go to the “MorphVox” menu, “Preferences”, in the “Sounds Settings” section, use the sliders to set the sound quality and its threshold. Check the “Background Cancellation” and “Echo Cancellation” checkboxes to suppress echo and unwanted sounds in the background.
That's it for setting up MorphVox Pro. Now you can start a conversation on Skype or record a video with your new voice. Until MorphVox Pro is closed, the voice will be subject to change.
In general, the MorphVOX Pro program interface is quite simple and understandable for the average user. However, people who have difficulty understanding in English may encounter some uncertainties. This article is intended for all those who cannot figure out how to use the program.
When you first launch the program, you will be greeted by Voice Doctor, which is designed to automatic settings programs for your voice and your microphone. Click next and check the box "Echo Cancellation"(echo elimination) if you use speakers as a sound-reproducing device.
If you have headphones, you can uncheck the box, because with them there is no echo. From the following list, select the microphone and headphones/speakers you are using. Make your choice carefully if you have programs installed on your computer that emulate these devices, since if you choose incorrectly, the program will not work.
At the next stage, you will be asked to enter a name for your profile (to save the settings under the name) and a description for it. Here you can enter whatever you want. Next, the final stage is checking the microphone. By pressing the Record button, read the words from the screen or simply speak something into the microphone.
If the volume is normal, the text will be highlighted in green; otherwise, you will be prompted to change the microphone volume in the settings Windows systems. Next, the program will automatically adjust the effects of voice changes and background noise according to the received data and will be ready to work.
Here is an image of the standard MorphVOX Pro window - as it appears after Voice Doctor has completed its work. Each mark corresponds to a different element, each of which is described in detail below.
By clicking on it, you can listen to a sample of this voice.
If the button is green, it means voice change is enabled.
If the button is green, it means you can hear your voice through the speakers with a slight delay. This is useful for testing and setting up voice changes, but confusing when speaking.
If the button is available, it means that changes have been made to the template. To save them as a template, click on this button.
Allows you to select a voice change pattern from the list.
It contains all the information associated with each of the voice patterns, which are divided into groups. If the indicator to the left of the template name is green, it means it is coordinated with information received from Voice Doctor; otherwise it is grayed out. To listen to a voice sample of a particular template, click on the small loudspeaker located to the right of the name.
The higher the indicator, the higher your voice sounds; The smaller it is, the correspondingly lower the voice.
Allows you to adjust the timbre of your voice.
Sets how strongly the tone value will be applied to the voice.
Resets voice pitch and tone settings.
Shows how loud you are speaking.
Enable/disable sound effect playback. Plays the selected sound effect in the speakers and sends it “down the line” so that it can be heard by your interlocutor.
Here you can select the sound effect that is played by the button above.
Sets the volume of the sound effect.
Opens a window with additional settings sound effects.
Turn on/off playback of one of the background sounds. Plays the selected background sound in the speakers and sends it “on the line” so that it can be heard by your interlocutor.
Allows you to select one of the background sounds to play from the list.
Sets the volume of the background sound.
Opens a window with additional settings for background sounds.
A 10-control graphical equalizer that allows you to make very subtle adjustments to your voice.
Reset the eucalizer settings to default.
Allows you to set eucalizer settings using pre-saved standard or custom presets.
Allows you to create your own custom template with eucalizer settings.
Deleting a once created template with eucalizer settings.
Allows you to add additional sound effects to already applied templates.
Gives access to even more advanced sound effect settings.
Allows you to select one of several profiles created in Voice Doctor.
Well, now let’s look at the main menu items of the program. Let's start with File:
Opens a window with many different settings.
Opens a dialog box in which you can apply a voice change effect to the contents of the file.
Almost all points Settings menu are present in the working window of the program and are described above, so there is no point in describing them. But in the Tools section there are several interesting points. For example, Run a Voice Doctor - launches a “voice doctor” in case your microphone has changed or for some other reason you need to perform automatic reconfiguration. The remaining items are intended for working with voice profiles and other minor parts of the program.
In general, we can sum it up. To enable voice change in the MorphVOX Pro program, you need to click on the corresponding button in the upper left corner.
In the list on the left you can select one of the voice change patterns. This list, by the way, can be expanded with the help of add-ons that are present in the archive with the program installer. To turn on background noise or a sound effect, you need to click on the corresponding key on the Sounds panel, and to install additional sound effects there is a panel in the lower right corner of the program’s working window.
Program morphvox pro is today one of the most popular utilities that allows you to modulate sound with external sources. To put it simply, with the help morphvox pro you can change your voice when talking on Skype and others common means of IP-telephony, as well as create a capellas for subsequent mixing work in a virtual studio. Of course there are possibilities morphvox pro They are very far from professional programs, however, they are quite sufficient for home use.
How to use morphvox pro?
After downloading and installing the utility on your computer, an interface with settings opens in front of us. As a rule, before starting the program, the user needs to make sure that the microphone is connected to the PC and is working properly.
So it opens morphvox pro and a window appears in front of us Voice Doctor in which the user must enter his data to fill out a profile.
Also here you can assign a microphone that will be used during recording and conduct tests, for which we press the button Record. After filling in all the required information, click Next and the window closes. Now you can work directly with the program itself.
Setting up the morphvox pro utility
A rather colorful utility interface appears before us with many additional functions and effects. It is worth noting that the program is not Russified, so it will be somewhat difficult for users who do not speak English to understand all its intricacies.
We will focus only on the most important points that will allow you to work correctly with the program:
1. Icon with which the current voice pattern is associated.
2. Button Morph Voice patterns are turned on/off. Listen in active mode allows you to hear your own voice in speakers or headphones with some delay. When integrating the program into Skype, this function can be disabled to avoid confusion during communication.
4. In the menu Tweak Voice There are three scales that change the pitch of the voice, its timbre and the strength of the timbre, respectively.
5. By adjusting the graphic equalizer, you can achieve the optimal voice setting value in the conditions environment. You can save changes using the button + , when clicked, the user will be prompted to add the current preset to the settings. Manage presets, delete them, and reset the equalizer to initial settings carried out here using the keys Preset, — And Reset respectively.
6. In the menu Sound The user can control various environmental effects (noise on the street, shopping center, etc.) by turning them off and on during recording using the keys located nearby.
7. Voice Effect allows you to add the necessary voice effects directly when using templates. To activate them, you just need to click on the indicator located next to the inscription.
To do this you need to go to Record your voice, which is located in the menu MorphVOX and select a directory to save the file. After this the button Record will become active and you can start directly recording your voice.
If you want to change the microphone or change the current profile, you can do this by calling the menu Voice Doctor by clicking to the one indicated on photo icon
In general, the MorphVOX Pro program interface is quite simple and understandable for the average user. However, people who have difficulty understanding English may encounter some confusion. This article is intended for all those who cannot figure out how to use the program.
When you first launch the program, you will be greeted by Voice Doctor, which is designed to automatically tune the program to your voice and your microphone. Click next and check the box "Echo Cancellation"(echo elimination) if you use speakers as a sound-reproducing device.
If you have headphones, you can uncheck the box, because with them there is no echo. From the following list, select the microphone and headphones/speakers you are using. Make your choice carefully if you have programs installed on your computer that emulate these devices, since if you choose incorrectly, the program will not work.
At the next stage, you will be asked to enter a name for your profile (to save the settings under the name) and a description for it. Here you can enter whatever you want. Next, the final stage is checking the microphone. By pressing the Record button, read the words from the screen or simply speak something into the microphone.
If the volume is normal, the text will be highlighted in green; otherwise, you will be prompted to change the microphone volume in Windows system settings. Next, the program will automatically adjust the effects of voice changes and background noise according to the received data and will be ready to work.
Here is an image of the standard MorphVOX Pro window - as it appears after Voice Doctor has completed its work. Each mark corresponds to a different element, each of which is described in detail below.
By clicking on it, you can listen to a sample of this voice.
If the button is green, it means voice change is enabled.
If the button is green, it means you can hear your voice through the speakers with a slight delay. This is useful for testing and setting up voice changes, but confusing when speaking.
If the button is available, it means that changes have been made to the template. To save them as a template, click on this button.
Allows you to select a voice change pattern from the list.
It contains all the information associated with each of the voice patterns, which are divided into groups. If the indicator to the left of the template name is green, it means it is coordinated with information received from Voice Doctor; otherwise it is grayed out. To listen to a voice sample of a particular template, click on the small loudspeaker located to the right of the name.
The higher the indicator, the higher your voice sounds; The smaller it is, the correspondingly lower the voice.
Allows you to adjust the timbre of your voice.
Sets how strongly the tone value will be applied to the voice.
Resets voice pitch and tone settings.
Shows how loud you are speaking.
Enable/disable sound effect playback. Plays the selected sound effect in the speakers and sends it “down the line” so that it can be heard by your interlocutor.
Here you can select the sound effect that is played by the button above.
Sets the volume of the sound effect.
Opens a window with additional sound effects settings.
Turn on/off playback of one of the background sounds. Plays the selected background sound in the speakers and sends it “on the line” so that it can be heard by your interlocutor.
Allows you to select one of the background sounds to play from the list.
Sets the volume of the background sound.
Opens a window with additional settings for background sounds.
A 10-control graphical equalizer that allows you to make very subtle adjustments to your voice.
Reset the eucalizer settings to default.
Allows you to set eucalizer settings using pre-saved standard or custom presets.
Allows you to create your own custom template with eucalizer settings.
Deleting a once created template with eucalizer settings.
Allows you to add additional sound effects to already applied templates.
Gives access to even more advanced sound effect settings.
Allows you to select one of several profiles created in Voice Doctor.
Well, now let’s look at the main menu items of the program. Let's start with File:
Opens a window with many different settings.
Opens a dialog box in which you can apply a voice change effect to the contents of the file.
Almost all points Settings menu are present in the working window of the program and are described above, so there is no point in describing them. But in the Tools section there are several interesting points. For example, Run a Voice Doctor - launches a “voice doctor” in case your microphone has changed or for some other reason you need to perform automatic reconfiguration. The remaining items are intended for working with voice profiles and other minor parts of the program.
In general, we can sum it up. To enable voice change in the MorphVOX Pro program, you need to click on the corresponding button in the upper left corner.
In the list on the left you can select one of the voice change patterns. This list, by the way, can be expanded with the help of add-ons that are present in the archive with the program installer. To turn on background noise or a sound effect, you need to click on the corresponding button on the Sounds panel, and to install additional sound effects there is a panel in the lower right corner of the program’s working window.
MorphVox Pro - special application, allowing you to change your voice when communicating or recording. The utility does not apply to professional modulators, but is quite suitable for home use. MorphVox Pro is suitable for Skype, WhatsApp, Telegram and others popular services for IP telephony. So what can the program do and how to use it?
Installing the utility
First, the user needs to find an installer and install the application. It is recommended to download the program from the official website. Applications downloaded from unfamiliar resources may contain unpleasant surprises such as viruses, spyware, etc.
To install you need:
After the installation is complete, the user needs to run the utility and enter personal information. In the window you need to fill in the field with email address, full name, indicate age and enter the key, if available.
Setting up the program
Before you start using MorphVox Pro, you should complete the setup. The software has ready-made presets. The user can choose the voice of a woman, a child, an old man, a robot, etc.
Customization Features:
Before talking through MorphVox Pro, it is recommended to adjust the volume and quality of speech, remove echo and unnecessary background sounds. To do this, you need to enter the program, click on MorphVOX and select "Settings…".
Note: The speech change will remain in effect as long as the modulator is running.
Using a modulator
Simple and fun program will help you make fun of your friend and diversify the conversation. The user only needs to install the application, select or configure the appropriate voice option and call a friend.
The further procedure depends on which version of Skype you are using. In the case of the classic one, the instructions are as follows:
And for the updated Skype it’s even simpler:
The program operates in passive mode. As long as the user does not stop the application, the speech will change.
