How to set up and pair Apple Watch with iPhone. How to transfer Apple Watch contents to a new iPhone How to combine a watch with an iPhone

Several years have passed, and during this time Apple has managed to perfect the watch setup process. Set up now new Apple Watch is much simpler than before. Training data is synchronized via iCloud, so switch from old ones Apple Watch it became easier with the new ones. Moreover, you can connect two Apple Watches to one iPhone at once.

This means you can keep your old Apple Watch connected to your iPhone while you set up your new one. This way, no data will be lost during the setup process.

If you completely want to switch to the new Apple Watch, you will need to disconnect the old watch from your smartphone and connect the new one. Below we will tell you in more detail how all this is done.

How to disable old onesApple Watch fromiPhone

Step 1: Make sure your iPhone and Apple Watch are close to each other.

Step 2: Open the application Apple Watch on iPhone.

Step 3: Select a tab My watch, and then select your watch.

Step 4: All Apple Watches connected to your iPhone will be here. If you have more than one watch, click on the " i" next to the ones you want to disable.

Step 5: Click Break the pair withApple Watch.

Step 6: Now enter your Apple ID password.

Wait until your Apple Watch resets, erases all content, and reboots.

How resetApple WatchwithoutiPhone

Step 1: Go to the application Settings on Apple Watch.

Step 2: Go to Basic-> Reset.

Step 3: Select Erase content and settings.

Step 4: Enter a password if required.

Step 5: When the reset is complete, go to the website iCloud. com on your computer and turn it off Activation Lock. To do this, on the iCloud website, go to Settings and in the section My devices select your Apple Watch. Click the icon X» next to the clock to remove it. Then confirm your action.

How tune newApple Watch

Step 1: Press the side button on your Apple Watch to turn it on. If the watch does not turn on, it needs to be charged.

Step 2: Hold your iPhone close to your Apple Watch. A window will appear on your iPhone asking you to pair your smartphone with your Apple Watch. Click Start pairing.

Step 3: An animation will appear on Apple Watch. Point your iPhone camera at your watch so that you can see the animation.

If that doesn't work, click Pair withApple Watch manually and use a password.

Step 4: After a while, authentication will complete and Apple Watch will begin setting up.

Step 5: Now you need to choose whether you want to restore this Apple Watch from a copy or set it up as new.

Step 6: Then accept the terms and agreements and sign in with your Apple ID.

Step 7: Customize the basic functions as you wish.

Step 8: Create a password. You can skip this step, but if you plan to use your Apple Watch for Apple Pay or unlock your Mac, it's worth setting a password. By default, you need to enter a password of 4 characters, but you can choose a password of as many as 6 characters, which will be more secure.

How to unpair an Apple Watch from an iPhone (unpair): 3 ways. How to pair an apple watch for the second time

How to pair with Apple Watch. How to connect to iPhone or iPad

If you already own a smart watch from Apple, then you should connect your Apple Watch to your iPhone in order to take advantage of all the functions of the watch. This article will tell you how to create a pair with Apple Watch. Also here you will learn how to connect the watch to iPad tablet, how to check for a connection between devices and what to do if the Apple Watch does not see the iPhone and the connection between them cannot be established.

How to pair with Apple Watch - creation process

There are 2 ways to create a pair of Apple Watch and iPhone - automatic and manual. The first way to connect gadgets is faster and easier; for it you will need:

1. Place both devices next to each other.
2. Turn on Wi-Fi on your iPhone, or mobile network.
3. On iPhone screen Click the “Watch” application icon.
4. Turn on the “start pairing” function.
5. Next, select the “ manual installation” at the bottom of the screen.
6. Tap the “i” symbol.
7. Your iPhone should now see your watch.
8. Then simply follow the program's instructions.

Which iPhones does the Apple Watch work with?

It all depends on what model of watch you have, but one thing is for sure - you will not be able to connect even the earliest model of Apple smartwatch to iPhone model who is younger than 5s. It is also necessary to have a version operating system iOS.

Apple Watch Series 3 (GPS) and all earlier watches will work with iPhone 5s, or later phones with latest version iOS.

Apple Watch Series 3 (GPS + Cellular) will only work with iPhone 6, or a more modern device (7, 8, X) with the latest version of iOS installed.

How to check the connection between Apple watch and iPhone?

You can check the connection in two ways - using the watch, or on the phone screen.

To check the connection on the watch display, you need to open the “Control Center”; to do this, swipe the main screen image from top to bottom. If an icon of a crossed out iPhone or a red cross appears in the upper left corner of the watch, it means that a connection has not been established between the devices. When using the Watch app on your iPhone to check if you are connected, you should go into the app and go to the Clock tab, it will contain information about your connection.

How to connect to iPad?

The principle of connecting an Apple Watch to an iPad tablet is no different from the method of connecting to iPhone smartphone which you can read above in this article.

What to do if Apple Watch does not see iPhone?

The first thing to do in this unpleasant situation is to check the connection, as described above in this article; if there is no connection, then this is where the problem lies.

The smartwatch manufacturer offers several solutions to choose from to solve this problem.

Method 1: Reconnect

Try connecting your Apple Watch to your iPhone again. For everything to go well, make sure that the devices are close to each other, you should also make sure that the iPhone is connected to Wi-Fi and Bluetooth, and that “Airplane mode” was turned off. To do this, open the bottom curtain of the device by swiping the screen from bottom to top. Notice the round images of Wi-Fi and Bluetooth? They must be active, the image of the aircraft must be inactive.

Next, check your Apple Watch watch face. If you find an airplane icon, it means “Airplane mode” is turned on on your watch. In this case, go to the Control Center, to do this, swipe the dial from the bottom up and turn off Airplane mode by clicking on the airplane symbol.

Finally, restart your Apple Watch along with your iPhone.

If after this you cannot restore the connection, resort to the second method.

Method two: Disconnect and re-create the connection between Apple Watch and iPhone

1. In the watch settings, open “Settings”, then select the “General” tab and click “Reset”, then “Erase content and settings”.
2. In the Apple Watch app on your iPhone, you need to select “My Watch” and tap the clock at the top of the display. Next to the clock symbol there will be an icon in the form of the letter “i”; click on it and select “Unpair with Apple Watch” from the menu. You must press twice to confirm the action.
3. Now pair your Apple Watch and iPhone again following the instructions above.

Third method: Apple technical support

If none of the above methods work, it is recommended to contact Apple support on the manufacturer’s official website, or in “ReStore” stores, or if this is not possible in service center. Do not attempt to resolve connection problems caused by damaged devices yourself.

myapples.ru

How to re-pair Apple Watch

How to connect Apple Watch to iPhone. Full instructions.

Apple Watch - setup and first impression

mi band 2 does not connect, synchronizing the fitness bracelet with the phone

Xiaomi Mi Band 1S does not connect / does not synchronize SOLVED THE PROBLEM SIMPLY!

Why doesn't my phone see my Bluetooth headset?

iPhone 8 Commercial Leaked!

GoPro Hero 4, 5 and 3: How to connect a GoPro camera to an iPhone and update the firmware

NEW LIFE OF OLD TV: POSSIBILITIES OF MODERN MEDIA PLAYERS

How to connect Sony SmartWatch if it is not supported by your smartphone

GoPro Hero 4 - how to connect to phone - #31

Also see:

• How to set a ringtone for iPhone
• How to transfer photos from iPhone to laptop
• Message iPhone what is it
• How to reset your password on iPhone app store
• Mac installation os on Macbook from disk
• Download vfeed as on iPhone for Android
• How to transfer photos from camera to iPhone
• How to verify email on iPhone
• How to download old version Skype on iPhone
• iPhone 4 does not enter dfu mode
• How to clean iPhone from scratches
• How to setup bank card on iPhone
• How to return photos to iPhone after updating
• How to adjust screen resolution on iPhone 6 Taiwan
• Screen turns blue on iPhone

iphones-4g.ru

How to get started with Apple Watch, pair it and sync it with iPhone

If you have already purchased an Apple Watch or are just about to do so, from this manual you will learn how to perform the initial setup, create a pair and synchronize your smartwatch. apple watch from iPhone.

Although official Apple Watch sales started only on April 24, back in early March Apple company released the final iOS version 8.2, which introduced a new Apple Watch application that allows you to create a pair between your Apple smart watch and iPhone. In addition, the Apple Watch app can be used to perform some smartwatch settings and synchronize data between it and your smartphone.

Initial setup of Apple Watch

1. To start using your Apple Watch, you need to sync it with an iPhone 5 or later model with iOS firmware 8.2 or later.2. Go to Settings -> Bluetooth on your iPhone and make sure Bluetooth is turned on.3. Make sure your iPhone is connected to Wi-Fi or a cellular network.4. Turn on your Apple Watch. To do this, press and hold the button on the side of the watch (next to the Digital Crown) until you see the Apple logo on the screen.5. Select and install a language on your Apple Watch. You can scroll through the list of languages ​​using swipes on the screen or the Digital Crown.6. After this, a window will appear on the Apple Watch screen prompting you to launch the Apple Watch application on your iPhone.7. Make sure your Apple Watch and iPhone are charged and located next to each other.

How to Automatically Pair Apple Watch with iPhone

3. Align the yellow viewfinder with iPhone display with animation on the Apple Watch screen.

4. As soon as a message appears on the iPhone display that the pair has been created, click on the “Set up as a new Apple Watch” button.

5. Depending on which hand you wear the watch on, choose one of the two options offered.

6. Confirm that you agree to the terms and conditions.

7. Enter your login and password account Apple ID.

8. Click "OK" after reading the information about location services.

9. Click "OK" after reading the information about Siri.

10. Click OK after reading the diagnostic information.

11. Set a 4-character password for your Apple Watch. For greater security, you will be asked to set a long password of 7 characters. Select the desired option. Please note that the passcode must be entered on your Apple Watch, not on your iPhone.

12. Choose whether you want to Apple unlock Watch was produced alongside the iPhone.

13. Choose whether you want all available apps to be automatically installed on your Apple Watch. You can also skip this step and install them later.

14. After this, you will see on the iPhone display that synchronization with Apple Watch is complete.

15. That's all. You've done the initial setup of your Apple Watch, paired it, and synced it with your iPhone.

How to Manually Pair an Apple Watch with an iPhone

If for some reason you don't want to automatically pair your Apple Watch with your iPhone using the camera, you can create it manually. In this case, simply enter the name of your Apple Watch to initiate the pairing process.

1. Launch the Apple Watch app on your iPhone.

2. Click the Start Pairing button on both your iPhone and Apple Watch.

3. Tap Pair Manually at the bottom of the Apple Watch screen, then tap the i button to display the name of your Apple Watch.

Once your iPhone detects your Apple Watch, follow each step above one by one, starting with step 4.

Apple Watch Instructions

If you have already purchased an Apple smart watch or are planning to do so, you may find our other instructions for using the Apple Watch useful:

How to get started with your Apple Watch, pair it, and sync it with your iPhoneHow to find and install an app on your Apple WatchHow to remove an app from your Apple WatchHow to turn on, turn off, or completely reset your Apple Watch

newapples.ru

Owners of smart watches sooner or later are puzzled by questions about pairing Apple technology together. In 90% of cases, this is a question of how to pair an iPhone with an Apple Watch. This is not surprising, since the company supplying such equipment to the market has its own characteristics, which indicate an individualized approach.

Don't be intimidated by pairing or synchronizing your iWatch with your iPhone or iPad, it doesn't take much time and just involves a few steps.
Photo: How to pair Apple Watch to iPhone?

Step by step instructions on how to connect Apple Watch to iPhone?

If you connect each stage of connecting or synchronizing a smartwatch to another Apple device, you get step-by-step instruction, which will help a novice user solve this problem. So, to successfully connect your iWatch to your iPhone, you need to:

• turn on the watch by pressing the button on the side; it must be held for 1-2 seconds, in short, until the Apple logo appears;
• after the company icon is displayed, you will see a message on the accessory screen in which you need to select a language (there are 4 of them). Stop at the one you know best;
• This is followed by confirmation for pairing between Apple Watch and iPhone. It must be accepted;
• following the instructions, install on iPhone app for smart watches, go into it, select “Create a pair”, and it should appear

appleiwatch.name

How to unpair Apple Watch from iPhone (unpair): 3 ways

If you have a desire to sell your Apple Watch (or pair it with another iPhone), then you will certainly be faced with the need to unpair the device from the iPhone (break the pair). This is very easy to do: you just need to perform a series of simple steps, and you can do this even without a smartphone.

In contact with

You may also need to unlink your Apple Watch from your iPhone if one of the gadgets malfunctions.

How to unpair (unpair) an Apple Watch from an iPhone if both devices are in front of you - method 1

1. Place both gadgets next to each other;

2. Open the Apple Watch application on your smartphone;

3. In the window that opens, at the bottom, the “My Watch” menu will be located - click on it;

4. After this, click on the “Apple Watch” item, on the next screen you must click on “i”.

5. By clicking on the “Unpair with Apple Watch” button, you should confirm the cancellation of device synchronization, after which all data about the watch will be deleted from the communicator.

He told me how to quickly and easily connect an Apple Watch to an iPhone, set it up and start using it.

Do you have a brand new Apple Watch? Congratulations! Sit back comfortably and put everything aside. You'll have to: pair your iPhone, update watchOS, customize your Apple Watch, and, of course, install some cool apps. I will tell you about all this now.

My bad first time setup experience

Setting up the Apple Watch for the first time wasn't as fast as I expected. The process itself is very easy, but the speed of rebooting, charging and synchronizing takes some time. Therefore, having bought a new watch, do not think that you will set it up in 5 minutes in the nearest cafe over a cup of coffee and go for a walk around the city with it. In any case, it didn't work out for me.

I bought an Apple Watch at the airport with more than two hours left before boarding. And I spent all this time charging, setting up and updating watchOS.

The stumbling block was the charging itself. The watch was discharged into rubbish and did not even want to turn on. I partially charged them from a power bank. Doing it on the go is a challenge. The magnetic charger does not hold up well and constantly falls off the watch.

Having charged the watch to about 20 percent, I began the process of pairing the Apple Watch with the iPhone, but at the end of synchronizing the applications, the watch was discharged again and the whole process had to start from the very beginning. Including the charging itself.

The second time everything worked, but updating to the latest version of watchOS took some more time. As a result, after almost 2 hours I received it ready for Apple work Watch with almost empty batteries, so I spent the next 2 hours of the flight fully charging them again.

But it's actually not that bad. You can connect your Apple Watch to your iPhone much faster if you don’t make my mistakes. It took me 15 minutes to re-pair my Apple Watch with my iPhone. But to this time you need to add charging, time to install applications and watchOS updates. In any case, I recommend making coffee. Let's go!

How to connect Apple Watch to iPhone

You'll need a charged Apple Watch, a phone with Bluetooth running, and the Watch app. Pairing devices is very intuitive: the watch and phone themselves tell you what to do and where to press. To connect Apple Watch to iPhone, you need to do the following:

1. Charge your Apple Watch to at least 60%. Synchronization with iPhone and settings quickly eat up the battery. And possible watchOS updates require that the watch be charged at least 50%. This is a very important point that will save you a lot of nerves. It will take approximately 55–60 minutes to charge the Apple Watch from 0% to 60%;

1. Turn on your Apple Watch, holding the side button for a long time (if they do not turn on, then, most likely, they are very discharged and the Apple Watch needs to be charged again). The watch will immediately ask you to select the interface language and go into pairing mode with the iPhone.

1. Launch the Watch app on iPhone and click on the “Pair with Apple Watch” button and point the video finder iPhone cameras to the “galaxy” on the watch screen. The process is similar to scanning a regular QR code. That's it, your watch has met your iPhone. But that's just the beginning of the fun.

Follow prompts on iPhone to complete the pairing process. You will be asked to perform a series of actions that are already familiar to many iPhone activation or iPad.

Hand setup and selection. If this is your first watch, click “Set up as a new Apple Watch.” If the setup has been done before, you can click “Restore from backup copy» and follow the instructions on the screen. Then press "Left" or "Right" on your iPhone to select your hand.

1. Enter your Apple ID password to use features such as Digital Touch and Handoff. If Find My iPhone isn't turned on on your iPhone, you'll also be asked to turn it on.

1. P check the settings. iPhone Settings settings in the Diagnostics & Usage, Location Services, and Siri screens will be sent to Apple Watch and vice versa. Therefore, if the settings of these services change on one device, they will be updated on the second.

1. Create a password. If you tap Create Password or Add Long Passcode on iPhone, you can create a Personal Passcode using your Apple Watch. Next, you need to decide whether the iPhone will automatically unlock the watch.

1. Synchronize programs. Click "Set All" to sync iPhone programs compatible with Apple Watch. Tap Later to sync only basic information, such as Mail, Contacts, and Messages.

The duration of this process depends on the amount of data being synchronized. Keep the devices close to each other until you hear a beep and feel a slight pulsation from your Apple Watch.

The clock turned on. What's next?

Next, you need to customize your Apple Watch. And I will tell you how to do this using my personal example. In fact, my changes affect almost all settings, so by setting up your watch according to my instructions, you will immediately become familiar with all the Apple Watch settings.

We will do all the watch settings through the Watch application for iPhone. Something can be configured directly through the watch, but working with a small screen is not as convenient as using phones. So open the Watch app again and let's get started.

How to update Apple Watch

First, you should check if there is latest firmware for Apple Watch and will update to the latest one. For this:

1. Open the application Watch
2. Select "General"
3. Click "Software Update"

If there is an update for your watch, your iPhone will notify you about it. To install it, simply follow the on-screen instructions and your iPhone will do everything itself. But remember that to install, the watch and phone must be charged at least 50%.

How to install programs on Apple Watch

If you missed the item when setting your watch automatic installation All programs compatible with Apple Watch, you will have to install them manually.

All compatible programs are available in the “My Watch” tab and are conditionally divided into two categories: Apple software and everything else. To install the program on Apple Watch:

1. Open the application Watch;
2. Select any application from the list (below);
3. Tap Show on Apple Watch.

That's all. After a couple of seconds, the program will be installed on the Apple Watch and will appear in the list of applications.

In some applications you will see additional options like “Display in Preview”, etc. We will return to these parameters a little later.

How to Automatically Install Apps on Apple Watch

If a new application appears on the iPhone that has a version for the Apple Watch, it can be automatically installed on the watch. For this:

1. Open the application Watch;
2. Go to the “My Watch” tab;
3. Select "Basic";
4. Select “Install programs”;
5. Enable "Auto-install programs".

How to sort apps on Apple Watch

A list of all applications on the Apple Watch can be seen by single-clicking on the Digital Crown. There is always a circle of a clock icon in the center, and icons for other applications appear around them.

In order not to spend a long time looking for the right program, I place the most necessary ones around the clock icon, that is, in the very center. For this:

1. Open the application Watch
2. Go to the “My Watch” tab
3. Select "Appearance"
4. Place the icons in the desired order

How to set up notifications on Apple Watch

When necessary programs installed, I move on to setting up notifications. By default, they are completely duplicated from your iPhone. But I prefer to leave only the really important ones. Not only is this less distracting, but it also saves watch battery.

1. Open the application Watch
2. Go to the “My Watch” tab
3. Select Notifications

Scroll to the bottom and turn off notifications you don't want to see on your Apple Watch. I have a couple of dozen of these.

How to change the brightness of the Apple Watch screen

The Apple Watch does not have manual brightness adjustment in the usual sense; it always changes automatically depending on the ambient light. But you can choose one of three algorithms automatic brightness. This can be done both on the watch itself and in the Watch app on the iPhone.

1. Open the application Watch
2. Go to the “Brightness and Text Size” tab
3. Set the options you want

Personally, I set it to minimum and do not experience any inconvenience, even at the equator. In the sun the display is a little faded, but the information is still visible.

What does the Apple Watch show when activated?

Apple Watch automatically activates when you raise your hand to look at the watch. By default, the watch face is displayed. But I like it to show the last running application. For this:

1. Open the application Watch
2. Go to the “My Watch” tab
3. Select "General"
4. Select "Activate Screen" (bottom)
5. Select your desired action

Oh, by the way, when you are on the watch face screen, double-tapping on the Digital Crown will open the last running application.

How to change the Apple Watch watch face

Unlike all previous points, setting up the Apple Watch dial occurs on the watch itself. To change the watch face on Apple Watch, press the screen lightly until you feel vibration feedback (Forth Touch, like the iPhone 6s). A menu will open in front of you with a selection of possible watch faces. Choose the one you like and click “Customize”.

Swiping left and right will move you between watch face settings, and you can adjust them by turning the Digital Crown.

Most watch faces have space to display extensions from third party applications. These settings are located on the last screen and can also be changed using the Digital Crown. To save your changes, press the Digital Crown and then tap the watch face.

In conclusion

Here's everything you need to start your Apple Watch for the first time. Now you can proceed to independently research the programs. Many of my favorite iPhone apps already have Apple Watch versions, so there's plenty for you to play with too.

We present to the attention of all future Apple owners Watch instructions on how to activate, configure and synchronize them with your smartphone. Before you buy this fashion accessory, it's worth knowing that to use it you need to have an iPhone 5 or later with iOS 8.2 installed on it. and above, as well as Apple ID. Only if you have these characteristics, and after you have decided on the watch model, you can safely buy it.

Turning on Apple Watch for the first time

Turn it on on your iPhone Bluetooth. You can do this from the “Settings” menu, or call up the “Control Panel” with a regular swipe, and turn on Bluetooth there.

Make sure that your smartphone is connected to the Internet via Wi-Fi or your mobile operator's network.

It's time to turn on the Apple Watch - to do this, press and hold the side button located next to the Digital Crown. Wait until the Apple logo appears on the device screen.

To minimize problems during the process of setting up and synchronizing your watch with your smartphone, you need to make sure that both of your devices are charged.

Setting up Apple Watch and syncing it with iPhone

How to enable automatic device synchronization?

On your watch, tap “Start Pairing.” After this, a specific animation should appear on the Apple Watch screen. After the watch setting program starts on your iPhone, click “Start Pairing” in it.

Now you need to point your smartphone camera at Apple screen Watch with the animation depicted on it. The yellow square on the iPhone screen should completely coincide with the frames of the watch display. After this, the devices synchronize with each other automatically.

Manual synchronization mode

In order to manually synchronize your Apple Watch and iPhone, you need to click on the “i” symbol located in the lower right corner, after which the watch identification number should appear on the screen. Now, in the app on your smartphone, you need to click “Pair Apple Watch Manually” and then manually enter the number.

Setting up your Apple Watch

• After a notification appears on the iPhone screen that the pairing has been successfully created, you need to click on “Set up Apple Watch as new.”
• Choose how you want to display content on your watch screen based on which hand you'll be wearing it on.
• Confirm your agreement with Apple terms and enter your ID.
• Once you agree to the geolocation service, you will no longer be able to cancel this action.
• Confirm using Siri.
• Confirm or decline your consent to the automatic error reporting service.
• Set a 4-digit password. To increase security, you can set a 7-character password.
• Thanks to Apple password Watch can be unlocked from iPhone. If the watch is on your wrist, the password entered from your smartphone will unlock it automatically. If the watch is not near you, in order to use the data from it, you will have to enter the password every time.
• You can automatically install all available apps on your Apple Watch, or you can do it manually later.
• Sync your accessory with iCloud to view photos, email, notifications, calendars, and messages on your watch screen.

Setting up your Apple Watch and syncing it with your iPhone is now complete.

This article will talk about how you can connect an Android watch to an iPhone. Finally, this has become possible, and you don’t even have to jailbreak your Apple smartphone.

The first to do this was a programmer under the nickname Mohammad AG: in confirmation, he published a video where it is clearly visible that notifications from the iPhone are perfectly transmitted to the wonderful “smart” watch. Unfortunately, the craftsman never released his synchronization application, which other programmers have successfully done, thanks to which any owner of both a smartphone and an Apple tablet can connect to their gadget without any problems. smart watch on Android.

It is noteworthy that for the first connection you will still have to use a phone based on the operating system from Google. This is where you will first need to connect your watch. As an example, the Sony SmartWatch 3 was linked to Xperia smartphones Z3. After this you will need to install it on your smartphone free application Aerlink, which will instantly appear in the main menu of the smartwatch.

For the next manipulation you will need to use an iPhone. You need to download a small utility called BLE Utility from the app store and run it. Next, take the watch and open the previously downloaded Aerlink program on it and try to search for devices. While the watch is searching for a smartphone, on the iPhone we go to the Peripheral tab.

Now the devices are guaranteed to find each other, you just need to enter the connection code without errors. This is how a working connection between iOS and Android Wear is done.

Possibilities

What can a smart watch do when paired with an Apple gadget? Any notifications work just great. When you swipe any of them, the notification will instantly disappear on your smartphone. Controlling music does not raise any questions: both volume control and rewind work. Of course, accepting and rejecting calls also works great, with the dialer look on the watch being designed in a style very reminiscent of iOS.

Flaws

Not without a fly in the ointment. For example, the watch always shows that some error occurred when connecting to an Android smartphone. Also, the Internet does not work, therefore, voice Google management not available. Replying to an incoming message using voice will not work, but long text does not unfold.

But the utility provides opportunities previously unavailable to iOS users. In addition, thanks to the utility, the watch works with both iOS and Android devices, and battery consumption remains the same. This method with an Android watch is suitable for those who, for some reason, do not like the recently released ones or want to have a round “smart” watch at their disposal.