Bluetooth for mobile phone connection. Finding devices using BlueTooth View

How to connect your phone to your computer via Bluetooth? This question comes up quite often. The point is that thanks to modern technologies We can transfer files from mobile to PC freely. And this is done without using any wires.

There are many different technologies wireless communication, but Bluetooth is the most widespread. Despite the fact that this connection is quite old, it still does not lose its relevance today. It has a lot of advantages. Eg:

• Noise immunity.
• Easy to use.
• Cheapness.

In other words, this technology is extremely simple and understandable for everyone, and at the same time it is accessible to absolutely everyone. But how to use it?

How to connect your phone to a computer via Bluetooth: Video

Preparing equipment for connection

It goes without saying that both devices must be equipped with Bluetooth wireless modules.

Moreover, you need to enable discovery. To do this on a laptop, you need to enter the module settings. This is done as follows. Find the Bluetooth icon in the system tray (bottom right corner of the desktop).

Right-click on it and select “Open Settings” in the menu that appears.

In the Settings tab, check the box next to “Allow Bluetooth to find this computer.” After that, go to the " Sharing" Here you need to check the box “Allow searching, sending and receiving files.” A little lower, for convenience, you can specify the path to the folder in which all received files will be saved.

So, the PC is prepared and configured. Now you can move on to the main question, how to connect your phone to your computer via Bluetooth.

Finding available Bluetooth equipment to connect to: Video

Pairing devices

You should also enable detection on your mobile phone. It is worth noting that on Android smartphones this function is enabled on certain time(about 2 minutes). In other words, after enabling detection on your smartphone, you need to be able to find it on your PC in no more than 2 minutes.

So, we turned on the adapter and detection on the smartphone. Now right-click on the Bluetooth icon in the PC system tray. Select "Add device".

As a result, a window will open in which a list of available connections will be displayed. Select the name of your mobile and click “Next”.

After this, a message with a code will appear on the laptop. This code must match the one that appears on the smartphone. If everything matches, then confirm it on both devices.

• Transfer files.
• Use PC to play music.
• Use as a headset and so on.

To do this, right-click on the Bluetooth icon (in the PC system tray) and select “Show devices”.

You can use Bluetooth to wireless connection devices to the phone. After you establish a connection for the first time, the devices will connect to each other automatically. If your phone is connected via Bluetooth to another device, you will see a Bluetooth icon at the top of the screen.

Important! Some of the steps listed in this article can only be performed on devices running Android 10 and later.

How to turn Bluetooth on and off

Advice. To save battery power, turn off Bluetooth when not in use. Also, it doesn't work in airplane mode.

Step 1: Pair with a Bluetooth device

Important! Established connection will be active until you cancel it.

Advice. If required, try entering 0000 or 1234.

1. Make sure the following conditions are met:
   • The Bluetooth device supports fast connection. If your device supports fast connectivity, it will have special markings on its packaging and possibly the text Made by Google or Made for Google. Check out the selection on the Google Store.
   • You are using a phone with Android 6.0 or later OS.
   • Your phone has Bluetooth and geolocation enabled.
2. Turn on your Bluetooth device and set the connection mode. The accessory must be located next to the phone or tablet.
3. Once you receive the notification, select Click to pair.
4. A "Device Connected" or "Connection Complete" notification appears.
5. If you need to configure your device, click Tune.

Advice. If you haven't received a notification, open your phone settings and tap Connected devices. Click on the device you want under Nearby Devices.

Step 2. Connection

How to set up, rename or turn off a Bluetooth device

Important! Settings may vary depending on your phone model. For more information,

Hello, dear readers of our portal! If you are reading this article, then you want to know about one simple and affordable way to transfer files from PC to phone or vice versa. I'm sure you know about it, and if not, I'll tell you how to connect your phone to your computer via Bluetooth.

I’ll say right away that Bluetooth technology is used everywhere, the wireless module is built into almost all modern electronic devices. Advantages:

• Resistance to interference;
• Easy to use;
• Wide application;
• Affordable price.

The topic is not complicated. But if you suddenly have questions or problems, be sure to write in the comments or online chat.

PC setup

• Let's go to " Windows Settings", select the "Devices" section;

• The “Bluetooth and other devices” page will open, where you will see a switch to enable/disable the function;
• Move the slider to the “On” state.

Additional connection settings can be found in the “Other Bluetooth settings” section on the right.

Here you need to enable detection for the connected smartphone - check the box next to “Allow Bluetooth devices to detect this computer.”

Watch detailed video instructions here:

Smartphone setup and pairing

Now, in order to connect your smartphone to a computer or laptop via Bluetooth, you need to enable the module on your mobile phone. Everyone knows how to do this - lower the curtain (swipe down the screen) and click on the “blue tooth” icon. Now this very icon will be displayed in notifications at the top of the screen.

Now we need to connect two devices. To connect your phone to your computer via Bluetooth, you need to add a mobile device. Click on the plus sign at the top (where it says “Add Bluetooth or another device”), select the type of device – in our case it’s Bluetooth.

You can add a smartphone through the system tray. Right-click on the corresponding icon and select “Add a Bluetooth device.”

The name of your smartphone will appear in a new window. Let's choose it. On the PC, click “Connect”. Your phone will ask you to connect. Click Pairing. At the same time, a PIN code appears on both devices. It needs to match on the smartphone and PC.

Once connected successfully, the phone will appear on the “Bluetooth and other devices” page. Now, as soon as the wireless module is activated on the PC and smartphone, pairing between them will occur automatically.

Working with files

Now look. We know how to connect a computer or laptop to a phone via Bluetooth, all that remains is to learn how to transfer files. It's simple:

• If we send from a smartphone, select “Accept file” on the PC, click “Send”, select the “Bluetooth” option;
• A list will open, select your computer there and wait for the process to complete;
• If we transfer files from a PC to a phone, select “Send...”, click on your smartphone, click “Next”;
• Now you need to click “Browse” and identify the files to send.

The following video shows how to transfer files with a confirmation code request:

It's simple, right? I would like to note that my instructions are also suitable for Windows 7, you can safely use it. Thanks everyone and bye!

Modern wireless technologies allow you to synchronize mobile devices with each other for different purposes. Today we will figure out how to connect a phone to a phone via Bluetooth.

Bluetooth is used in two cases - when transferring data from one device to another and for remote control. Let's consider both options in turn.

In most cases, users transfer various data between two mobile devices using Bluetooth technology. Phones should be located close to each other with activated function wireless transmission files. On devices under Android control This option is activated in two ways.

Swipe down on the phone screen to open the top curtain and select the Bluetooth icon on the access panel, if it is there. If it's not there, you can add quick start on the top panel or use the second method.

The second option is slightly longer. You need to find the settings section on the main screen or in the device menu (depending on the shell). After that, open the wireless network settings tab and activate the Bluetooth function.

Titles and appearance menus on Android may vary depending on the version of the operating system and the manufacturer's shell. But the principle of turning on Bluetooth is the same everywhere.

Now you need to connect your phone to another device:

Now let's look at connecting two phones running iOS. First, turn on the Bluetooth function in the same way through the main menu or using the panel quick access. However, on devices Apple given The “curtain” opens by swiping up.

Now open your wireless settings and enable device search. Once the second phone is found, connect to it and save it in memory.

Some devices are displayed in the search not with the real name of the company and model, but with a code of numbers or letters. Look at the device name in the settings first so as not to connect to a third-party phone. Relevant when transmitting data in a public place.

The second option for connecting two devices via Bluetooth is remote control device. For this you can use third party application Tablet Remote. It turns one smartphone into a full-fledged remote control for controlling the functionality of another smartphone. You need to install this software on both devices and do the following:

1. Open the application on the control device and select the “Setup” section.
2. Enable all options and go to “Connection”.
3. After turning on Bluetooth, select the desired option from the list of found devices.
4. Now open Tablet Remote on the second phone and go to the “Remote” item.

In this way, you can turn one smartphone into a wireless gamepad and enjoy mobile games on the screen of another device. In the application settings you can change the layout virtual keyboard depending on the method of use.

Video instruction

If you need visual instructions on this topic, then after reading the article you can familiarize yourself with the presented video.

Conclusion

So, now you have learned about two ways to connect phones to each other. We looked at the differences between operating rooms Android systems and iOS. As you can see, in both cases, data transmission via Bluetooth is almost identical. If you have questions on the topic, then ask them in the comments below, and we will answer you as soon as possible!

In this article we will look at one of the programs that is used to search for BlueTooth devices and view information about them - BlueTooth View.

Many people know what BlueTooth is, but just in case we will remind you what it is. - this is the specification wireless networks, that is, a set of rules by which they communicate wireless devices, such as phones, PDAs, laptops, netbooks, wireless printers and scanners. The range of the technology is small, so it is used for communication within a small radius (for the most advanced equipment - up to 100 meters without obstacles, if there are walls or other objects blocking the path of radio waves - then less).

To operate and detect BlueTooth devices, special drivers and several programs are required that allow you to perform various functions (search for devices, connect, transfer files, etc.). Software, which combines drivers and an external software shell, is called the BlueTooth stack. Now the most popular stacks are from Microsoft and Broadcom. They are universal, but not all functions implemented in them work and look the way the user would like.

In particular, this concerns the implementation from Microsoft. The proposed device scanner is quite slow, often fails to find a connection the first time, and has a rather cumbersome and inconvenient interface. To correct this sad state of affairs, various scanner programs from third-party developers are used.

One such scanner is BlueTooth View. We will consider latest version at the time of writing - 1.41, taken from the official website of the developers - nirsoft.net. The program is distributed absolutely free of charge and works only with a stack from Microsoft Windows.

BlueTooth View compares favorably with programs of this kind with its interface - all data is clearly presented in table form.

The table displays all data about the device - name, physical address, device type (phone, computer, etc.) and in particular (smartphone, laptop), time of first and last connection, state of the device and connections to it, etc. The same information can be accessed by double-clicking the left button on the device in the table. In the window that appears, the information looks more visual and understandable. This type is especially helpful when there are many connected devices and the lines can be mixed up.

Information about devices can be copied, edited, changed prompts, and selected the type of columns. You can even withdraw general information in the form of an HTML table.

When launched, the program has its own icon in the tray, which, unfortunately, is very similar to the BlueTooth icon from Windows adjacent to it - it’s easy to confuse it. The tray menu is spartanly short - only three items: open the program window, restart and exit.

A little about my impressions of the program. It works really fast, finds devices almost instantly, there are no problems with that. Information about devices is extremely accurate, all the nuances are displayed. If desired, you can connect a device by right-clicking on it and selecting an item from the menu. Connection is carried out through the standard connection procedure Windows devices. The program options, called up by the right key, are scattered across various menus, and this is in some ways convenient - it’s intuitively clear where to look for them. I was also surprised by the ability to write macros on a connected device and set specific settings for each device.

In general, the options are used to change various little things - fonts, tables, grids, etc. You can set the frequency of searching and updating the device table, play a sound when they are detected, and turn on an information message when connecting. In general, there are not so many settings and they all serve mainly a decorative function.

The program has practically no downsides. You can, of course, blame it for its nondescript and simple appearance, but thanks to this it works very quickly. Another drawback is that it is only compatible with the BlueTooth stack from Microsoft Windows, and this problem is typical for many programs that work with BlueTooth (for example, BlueTooth Radar, BlueTooth Network Scanner).

To summarize the above, we can say that BlueTooth View is very fast program, with practical and simple interface and the absence of complex and incomprehensible settings. Everything is simple and intuitive. Plus it's free. There is one “but” - it only works with drivers from Microsoft, so owners of drivers from other manufacturers will have to use programs from the equipment manufacturer or look for another alternative.

As a conclusion: this program is ideal for you if speed of work or ease of learning is important. If appearance is important to you, then we advise you to pay attention to another similar program with similar functions, but a beautiful and unusual interface -.